Assemblies may include halogen or incandescent test bulbs that should be replaced before installation.
Features and Benefits
Direct Fit - No vehicle or wiring modification necessary
DOT, SAE, and FMVSS Compliant - Meets on-road use regulations
Matching set for a restored look
Item Condition:New
Attention California Customers:
WARNING: This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
How to Replace Corner Light 1993-97 Ford Ranger
Created on:
Tools used
Ratchet
11mm Wrench
11mm Socket
1. Removing the Parking Light
Remove the 11mm nut from the parking light
Pull out the parking light
Disconnect the wiring harness
2. Servicing the Bulb
Twist the bulb socket counterclockwise out of the light
Pull the bulb off of the socket
Push on the new bulb
Twist the bulb clockwise into the light
3. Installing the Parking Light
Connect the wiring harness
Line up the studs on the parking light with the holes on the vehicle
Tighten the 10mm bolt to the parking light
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
In this video we're going to show you hot to replace the side parking light. It's the orange light right next to the headlight on any '93-'97 Ranger. The only tool you'll need is an 11mm wrench or a socket with a ratchet.
You want to remove the parking light which involves moving an 11mm nut right there. An 11mm socket with a ratchet or a wrench works fine as well. Now, put your fingers in behind here and it's held in by just a couple of pins that have to push through. Feed the wiring harness out. Here's the signal light.
If you're looking to just change this bulb, turn it counterclockwise, pull it out. The bulb just pulls out and pushes in. Here's a nice new light from 1A Auto. If you had some minor damage or whatever, you're going to go in and replace, just like the original. You can see we've put in some new trim and a new headlight. What you're probably going to want to do is unplug the bulb from the harness and then put it in and re-plug in the bulb.
This and this line up with little clips. You can just kind of peek in, get one of them in. You might need to push the harness back in a little bit to get the other one in. Make sure that your stud up here is lined up. Push it right back in. Put your 11mm nut back on.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
SLA87454
In Stock
Product Reviews
Loading reviews
There are no reviews for this item.
Customer Q&A
No questions have been asked about this item.
Customer service
877-844-3393
Monday - Friday 8:00am - 9:30pm ET Saturday - Sunday 8:00am - 4:30pm ET
Ford is a registered trademark of Ford Motor Company. 1A Auto is not affiliated with or sponsored by Ford or Ford Motor Company.See all trademarks.
Enter Vehicle Year Make Model
Specify your vehicle's year, make and model to guarantee fit.
Year
Make
Model
Options
Drivetrain
This part doesn’t fit a . Select from parts that fit.