Install Tip: Keep & reuse your original hardware, new hardware is not included with this item.
Item Condition:New
Attention California Customers:
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
How to Replace Lift Support 1993-98 Jeep Grand Cherokee
Created on:
Tools used
6mm Socket
7mm Socket
Ratchet
1. Replace the tail gate lift struts
Unbolt the two bolts anchoring it
Unclip the clip with a screwdriver and the strut falls out.
Reverse the process to install the replacement.
This video is brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the internet.
In this video we're going to show you how to replace the rear tailgate lift struts. You might need these if your tailgate hits you in the head every once in a while, just hard to lift up, things like that. It's actually a really easy process. There are two bolts up top on the tailgate. Use a 6-mm star socket. If you don't have one of those, either a 7-mm metric or I believe it's a 1/4 inch socket. Just press on there real hard and get those bolts out.
After that let me speed it up. Then really after that, use a screw driver and there's a little clip, just pull that clip and then the strut basically falls right off. Then if you put a new one on, you make sure that clips on there. You just pop it on and then you reach up and you put your two bolts back in. Excuse me. I'll get the camera angle better here in a second. You put your two bolts back in and that's it. Actually, one thing to remember, you should have somebody either holding the tailgate, or your piece of wood that you usually use to hold it up when you're getting your groceries and stuff like that out. That's about it. Thank you very much.
Thanks for watching, this video was brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the internet. We hope this helped you out. Feel free to call us toll free 888-844-3393. Thank you
GSA47461
In Stock
Product Reviews
Loading reviews
5.00/ 5.01
1review
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
1
0
0
0
0
William
July 28, 2023
THEY WORK GREAT !!!!!!!!
Customer Q&A
HOW DO I CONNECT THE BRACKET IT COMES WITH TO THE LIFT SUPPORT ?June 12, 2018
D C
10
This part is the Hatch Lift Support. This is for one support. We recommend replacing them in pairs.
June 12, 2018
Elesban A
Customer service
877-844-3393
Monday - Friday 8:00am - 9:30pm ET Saturday - Sunday 8:00am - 4:30pm ET
Jeep is a registered trademark of FCA US LLC. 1A Auto is not affiliated with or sponsored by Jeep or FCA US LLC.See all trademarks.
Enter Vehicle Year Make Model
Specify your vehicle's year, make and model to guarantee fit.
Year
Make
Model
Options
Drivetrain
This part doesn’t fit a . Select from parts that fit.