Replaces
Assemblies may include halogen or incandescent test bulbs that should be replaced before installation.
Features and Benefits
Item Condition:
New
Attention California Customers:
WARNING: This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
The bulbs are for testing and not covered under our warranty. Our warranty applies to the light assembly only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
Created on:
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the internet. Hi, I'm Mike Green, I'm one of the owners of 1A Auto. I want to help you save time and money repairing and maintaining your vehicle. I'm going to use my 20 plus years experience, restoring and repairing cars and trucks like this; to show you the correct way to install parts from 1AAuto.com. The right parts, installed correctly. That's going to save you time and money. Thank you and enjoy the video.
In this video we'll be replacing the side marker and signal light, next to the headlight, on a 95' Accord. Same as a 94' to 97'. All is you'll need is a Phillips screwdriver. To replace one of these side markers light here, what you want to do is open up your hood. Then there's going to be a little screw right here that you want to remove. Use your Phillips screwdriver, remove that screw. Then what you do is just grab the whole light and pull it forward and it comes out. If you're just looking to replace bulbs, these twist out and come out.
Then obviously if you want to replace the whole assembly, they come out. These little sockets, actually if you press you can remove the socket and then this bulb actually removes from there on a different connection. Obviously if you want to just replace your bulb, you can just replace it right there. Re-installation, just the opposite. Push in, twist to lock, push in, twist to lock. Now you have this pin goes into this hole, there's a tab here that goes into this slot, and then there's two little pins here that go back into these here. Just make sure you get all that stuff lined up. Push it in and then your little Phillips screw. You're all set.
We hope this helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the internet. Please feel free to call us toll free, 888-844-3393. We're the company that is here for you on the internet and in person.
