Replaces
Assemblies may include halogen or incandescent test bulbs that should be replaced before installation.
Features and Benefits
Item Condition:
New
Attention California Customers:
WARNING: This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
The bulbs are for testing and not covered under our warranty. Our warranty applies to the light assembly only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
Created on:
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Mike from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video, we show you how to service the side marker light whether you have to replace the bulb or if you've gotten into a little incident and you need to replace a broken one. It is a pretty easy operation. The only thing you'll need is a Phillips screwdriver, a flat blade screwdriver and a paper towel or a rag to protect your paint.
Open up your hood, and you want to remove this Phillips screw right here. Once you get that screw out, just kind of move the light around a little bit. Take a paper towel and a flat blade screwdriver, insert it in the back here. Pry it forward, as well as, I'm pushing on the tab here forward. Then pop the light out. Then, for this bulb, you can push on the little tab and disconnect, and then the bulb just twists counterclockwise, and this bulb pulls out.
The new light from 1A AUTO is exactly the same as the original one. It's got a bolt here exactly the same. I'm going to reconnect my bulb first. It's got a little tab right here and here. Those both go into the lineup. This goes into this clip. This goes right into this lineup hole. Then make sure that these, obviously, go on the inside of the fender. Push it back in. Now, push the top in. Start your screw here.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
