Assemblies may include halogen or incandescent test bulbs that should be replaced before installation.
Features and Benefits
Direct Fit - No vehicle or wiring modification necessary
DOT, SAE, and FMVSS Compliant - Meets on-road use regulations
Matching set for a restored look
Item Condition:New
Attention California Customers:
WARNING: This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
How to Replace Tail Light 1997-2003 Pontiac Grand Prix
Created on:
Tools used
No Tools Needed
1. Remove the tail light assembly
Pull back the trunk liner
Remove the three thumb screws and remove the tail light assembly.
Disconnect the wiring harness from under the vehicle and remove the bulbs.
Service your bulbs at this point or put your bulbs in the new tail light assembly.
2. Install the tail light assembly
Plug in the bulbs and wiring harness.
Clip the tail light assembly into the vehicle.
Replace the three thumb screws and trunk lining.
Close the tail gate.
Brought to you by 1AAuto.com. Your source for quality replacement parts and the best service on the internet.
In this video, I'm going to show you tail lights replacement on this 98 Pontiac Grand Prix same as the 97 to 03. I'll show you replacing both the whole tail light assembly and how to adjust, replace the bulbs. No tools are needed.
To remove all these tail lights, you pull this back actually you're going to... You have this net, pull the net off first. Okay, pull back here and then move these three thumb screws. Tail lights goes back and off. If you're just looking to replace your bulbs, you just twist these little ones. The little one pull right out, push back in. Okay, larger ones have old tab, press down, twist the bulb, the same thing. Pull out this one in. Okay, the same thing over here with this one.
There goes our original light and the light from 1A Auto. It seems like they're almost the same. This just doesn't have this inflammation separated going on so it looks a lot better, a lot fresher. Going to install all the same, put your bulbs in, twist. Put this in, twist. Give it a twist. Okay, and we'll speed it up here as put those thumb screws back on. You just needed to tight them up by hand. Make sure you put the one that the cargo net hooks to if you have it down the lower corner.
We hope this helps you out. Brought to you by www.1AAuto.com. Your source for quality replacement parts and the best service on the internet. Please feel free to call us toll-free at 888-844-3393. We're the company that's here for you on the internet and in person.
336-1914R-UC
In Stock
Product Reviews
Loading reviews
There are no reviews for this item.
Customer Q&A
No questions have been asked about this item.
Customer service
877-844-3393
Monday - Friday 8:00am - 9:30pm ET Saturday - Sunday 8:00am - 4:30pm ET
Pontiac is a registered trademark of General Motors Company. 1A Auto is not affiliated with or sponsored by Pontiac or General Motors Company.See all trademarks.
Enter Vehicle Year Make Model
Specify your vehicle's year, make and model to guarantee fit.
Year
Make
Model
Options
Drivetrain
This part doesn’t fit a . Select from parts that fit.