Complete Repair in One Purchase - Stop searching for parts individually and complete your repair with a customized kit or set from DIY Solutions.
High-Quality Parts from Trusted Brands - DIY Solutions' kits and sets are selected from the best automotive brands and include hard-to-find and even obsolete parts you may need for your vehicle.
Guaranteed Fit - DIY Solutions ensures its selected parts are quality-tested to guarantee fit and function.
Assemblies may include halogen or incandescent test bulbs that should be replaced before installation.
Features and Benefits
Direct Fit - No vehicle or wiring modification necessary
DOT, SAE, and FMVSS Compliant - Meets on-road use regulations
Matching set for a restored look
Item Condition:New
Attention California Customers:
WARNING: This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
How to Replace Corner Light 1993-98 Jeep Grand Cherokee
Created on:
Tools used
Number 2 Torx driver
1. Removing the Side Marker Light
Loosen the lower T2 Torx screw from the side marker light
Remove the lower T2 screw from the marker light
Pull out the marker light
2. Servicing the Side Marker Light Bulb
Twist the bulb out of the side marker light
Disconnect the bulb from the socket
Connect the new bulb
Twist the bulb into place
3. Installing the New Side Marker Light
Push the marker light into place
Insert the lower T2 screw into the marker light
Insert the top T2 screw into the marker light
This video is brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the internet.
Hi. My name is Mike Green. I want to help you save time and money repairing your vehicle. I have 20-plus years experience restoring and repairing cars and trucks. My company, 1A Auto, sells high quality replacement parts over the internet. In this video I'll be showing you how to install these parts. By the end of this video, you'll know how to install them and where to get them. That's going to save you time and money. Thank you and enjoy the video.
In this video, we'll be replacing these side marker lights on this 1998 Jeep Grand Cherokee. It's a very easy replacement. It only requires a number 2 Torx screwdriver. The side marker light is held in by two Torx screws and here is a close up of the first one. It's a little hard to find. It's between the side marker and the lower parking light. Here now you can see, I'm inserting my Torx driver into there and loosening up that screw. I'll loosen it in up some and then I'll actually take the top one off. The top one is just located right inside the fender right there. You'll notice I have the headlight out. You do not have to have the headlight out. Again, you don't have to have the headlight out. I was just doing another project and filming this at the same time. You can remove this marker easily without taking the headlight out. I remove that top screw, and now I am going to finish removing. The reason I did it that way is because when I pull the light out, I want to pull the screw out, too. I don't want to try and reach in there and remove that screw.
You can service the bulb at this point or replace it. Note that you do have to have the orange bulbs. To put it back in, put the screwdriver in there. Keep the screw in its location and then find that area and then start it in. I'll just start it in place and then I'll put the top one in. You always want to do it this way so you can kind of move it around loose. Get that top one started in and then I'll tighten up the bottom one and I'll tighten up the top one. That's pretty much it. Side marker lights on these are pretty easy fix.
We hope this helped you out. I wish you good luck on your Jeep Grand Cherokee project. Your source for quality replacement parts and the best service on the Internet. You call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
Product Reviews
Loading reviews
There are no reviews for this item.
Customer Q&A
No questions have been asked about this item.
Customer service
877-844-3393
Monday - Friday 8:00am - 9:30pm ET Saturday - Sunday 8:00am - 4:30pm ET
Jeep is a registered trademark of FCA US LLC. 1A Auto is not affiliated with or sponsored by Jeep or FCA US LLC.See all trademarks.
Enter Vehicle Year Make Model
Specify your vehicle's year, make and model to guarantee fit.
Year
Make
Model
Options
Drivetrain
This part doesn’t fit a . Select from parts that fit.