Kit Includes: (1) Passenger Side Outer Tail Light (1) Driver Side Outer Tail Light
Specification
Side Location
Driver & Passenger Side
Body Type
Sedan
Number of Doors
4 Door
Location
Outer
Product Features
Direct Fit - No vehicle or wiring modification necessary
DOT, SAE, and FMVSS Compliant - Meets on-road use regulations
Matching set for a restored look
Complete Repair in One Purchase - Stop searching for parts individually and complete your repair with a customized kit or set from DIY Solutions.
High-Quality Parts from Trusted Brands - DIY Solutions' kits and sets are selected from the best automotive brands and include hard-to-find and even obsolete parts you may need for your vehicle.
Guaranteed Fit - DIY Solutions ensures its selected parts are quality-tested to guarantee fit and function.
Assemblies may include halogen or incandescent test bulbs that should be replaced before installation.
Item Condition:New
Attention California Customers:
WARNING: This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
How to Replace Tail Light 1998-2000 Honda Accord
Created on:
Tools used
Flat Blade Screwdriver
8mm Socket
Ratchet
1. Removing the Taillight
Remove the screw clip by pulling out the center and then the rest.
Pull back the insulation.
Twist all of the sockets out of the taillight assembly.
To replace a bulb pull the bulb out and push the new one in. Twist the socket back in.
Remove another clip on the plastic panel and pull the insulation further back.
Remove the three 8mm nuts.
Pull the light out and off.
2. Replacing the Taillight
Line up the light and push it into place.
Twist in the sockets.
Replace the three 8mm nuts.
Replace the insulation.
Replace the clips.
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
In this video, we're going to show you taillight replacement, both if you need to replace the entire taillight, because you broke one, or if you just need to replace the bulbs. The only tools you'll need are an 8mm socket and ratchet and a flat blade screwdriver.
To replace a taillight on one of these Accords, you want to remove these little clips. They have little screwdriver heads on them. Lightly unscrew them. The middle pulls out. The rest of it pulls right out. You pull this right forward. If you're just looking to replace your bulbs, you can reach in here, twist counter clockwise, pull this back, and the bulbs just pull out, and push back in. Ok, the other one, the lower one. Also pull out, put them back in. If you're looking to replace the entire light assembly, an 8mm wrench, there's 3 nuts back here. Also, what I did, was loosened up another pin, pulled my trim back a little more.
I'm just going to fast forward as we remove those 3 10mm nuts. Once those nuts are off, the light comes right back and off. You can see this one is a little broken so we will replace it. New light from 1A Auto, exact same as the old light. I'm going to go in. These locating pins here. Make sure when you push it in, those goes go into where they should on the body. As well as making sure that the studs are going in. Now we're just going to speed up, as we put those nuts back on. You might want to push in on the light a little bit. It helps you just twist them on with your fingers a little more. You want to tighten up with a wrench. You don't want to, they don't have to be incredibly tight. You want to make sure they're nice and snug. There you go with a nice new taillight.
We hope this helps you out. Brought to you by www.1Aauto.com, your source for quality replacement parts and the best service on the internet. Please feel free to call us toll free 888-844-3393. We're the company that's here for you on the internet, and in person.
LHT07295
In Stock
Product Reviews
Loading reviews
4.00/ 5.01
1review
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
0
1
0
0
0
Direc fit
Jay
September 14, 2024
Direct fit and came with bulbs
Customer Q&A
No questions have been asked about this item.
Customer service
877-844-3393
Monday - Friday 8:00am - 9:30pm ET Saturday - Sunday 8:00am - 4:30pm ET
Honda is a registered trademark of Honda Motor Co., Ltd. 1A Auto is not affiliated with or sponsored by Honda or Honda Motor Co., Ltd.See all trademarks.
Enter Vehicle Year Make Model
Specify your vehicle's year, make and model to guarantee fit.
Year
Make
Model
Options
Drivetrain
This part doesn’t fit a . Select from parts that fit.