Assemblies may include halogen or incandescent test bulbs that should be replaced before installation.
Features and Benefits
Direct Fit - No vehicle or wiring modification necessary
DOT, SAE, and FMVSS Compliant - Meets on-road use regulations
Matching set for a restored look
Item Condition:New
Attention California Customers:
WARNING: This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
The bulbs are for testing and not covered under our warranty. Our warranty applies to the light assembly only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
How to Replace Corner Light 1999-2002 Toyota 4Runner
Created on:
Tools used
Phillips Head Screwdriver
1. Removing the Front Side Marker
Remove the Phillips screw on top of the marker light
Remove the marker light by hand
Disconnect the wiring harness
Twist the socket counterclockwise
Remove the bulb
2. Installing the Front Side Marker
lace the bulb in the socket
Turn the socket clockwise
Insert the front side marker into place
Insert and tighten the Phillips screw on top of the marker light
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Mike from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to replace the side marker lights, or the light right next to the headlight on this '99 Toyota 4Runner. It's same as any '99 to '02. This is really easy. All you need is a Phillips screwdriver, and I'll show both replacing the entire light, as well as just replacing the bulb.
One Phillips screw is right on top here. There's a little clip at the bottom. Pull that right out. You need to disconnect that. This socket twists and this light will pull right out.
Your parking light from 1A Auto, it's going to be the exact same as your original. If you have one broken, you just want to replace it and make it look nicer. Just make sure that on the side everything lines up properly. Push it back into place and put in your Phillips screw.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
TY673-B000R
In Stock
Product Reviews
Loading reviews
There are no reviews for this item.
Customer Q&A
No questions have been asked about this item.
Customer service
877-844-3393
Monday - Friday 8:00am - 9:30pm ET Saturday - Sunday 8:00am - 4:30pm ET
Toyota is a registered trademark of Toyota Motor Corporation. 1A Auto is not affiliated with or sponsored by Toyota or Toyota Motor Corporation.See all trademarks.
Enter Vehicle Year Make Model
Specify your vehicle's year, make and model to guarantee fit.
Year
Make
Model
Options
Drivetrain
This part doesn’t fit a . Select from parts that fit.