Replaces
Part Details
Product Features
Complete Repair in One Purchase - Stop searching for parts individually and complete your repair with a customized kit or set from DIY Solutions.
High-Quality Parts from Trusted Brands - DIY Solutions' kits and sets are selected from the best automotive brands and include hard-to-find and even obsolete parts you may need for your vehicle.
Guaranteed Fit - DIY Solutions ensures its selected parts are quality-tested to guarantee fit and function.
Assemblies may include halogen or incandescent test bulbs that should be replaced before installation.
Item Condition:
New
Attention California Customers:
WARNING: This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
Created on:
Tools used
Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the internet.
Hi, I'm John from 1A Auto. I hope this how to video helps you out. The next time you need a part for your vehicle, think of 1AAuto.com. Thanks.
In this video, we are going to show you how to service the tail light on this 2000, Chevy Caviler, same for any 2000 to 2002. It's a pretty easy process for it. You will see everything you need if you are just looking to change a bulb, as well as, you see the whole process if you want to change your rear taillight if it is broken or damaged in some way. If you are just looking to change a bulb, you don't need any tools. If you are changing a broken taillight assembly, then you will need either a 10mm wrench or a 10mm socket with a ratchet.
Open your trunk and if you have a cargo net, remove it from the little knot there, and twist that counterclockwise, and remove it. Then you can pull your insulation down out of the way. If you are just looking to change a bulb or if you are going to change the light, the taillight bulb simply turns a little bit counterclockwise and comes out. The bulb pulls straight out and pushes back in.
To change the entire taillight, there are three 10mm nuts. The best tool to use is a socket and ratchet, as you see here, but a wrench would work as well. Then, just pull the taillight out from the body. If you want to disconnect the socket, there is just a little tab, push down and pull. Okay, new taillight from 1A Auto is on the bottom. You can see it is exactly the same as the original. Put the taillight in place. You can put the bulb in there at first or you can wait until afterwards. But, get it in place and get the studs through correctly and then start on the 10mm nuts.
We will speed up here as we put those nuts on and then tighten them up. You don't want to over tighten them. You want to just tighten them nice and firm. Okay, now, make sure that your bulb and socket are in place and nice and secure. Then put your insulation back in place. Tuck the top right up under. Then put that retaining bolt in that holds your net, if you have it, and put the net back in place.
We hope this helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts, and the best service on the internet. Please feel free to call us toll free 888-844-3393. We are the company that's here for you on the internet and in person.
