Replaces
Install Tip: Keep & reuse your original hardware, new hardware is not included with this item.
Item Condition:
New
Attention California Customers:
WARNING: This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
Created on:
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Don from 1A Auto. I hope this how-to video helps you out, and the next time you need a part for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to replace the rear hatch lift supports on this 2005 Ford Excursion. It's the same parts and similar process on these Excursions from 2000 to 2005. We'll show you on the passenger's side, but the driver's side has the same procedure. The items you'll need includes new rear hatch lift supports from 1AAuto.com and a flat blade screwdriver.
You want something or someone to safely secure the tailgate while you're doing this. Holding the support into place is these two clips. You just pry them out and pull the piston from those studs, so make sure something or someone is safely securing that tailgate. Then pry out the clip and just pull out on the piston. Do the same thing up here. On the bottom is the old lift support; above it is the new one from 1A Auto. You can see they're identical, and they're going to fit exactly the same. Take your new support and just push it on to the two studs. You're all set.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
