Replaces
Part Details
Product Features
Complete Repair in One Purchase - Stop searching for parts individually and complete your repair with a customized kit or set from DIY Solutions.
High-Quality Parts from Trusted Brands - DIY Solutions' kits and sets are selected from the best automotive brands and include hard-to-find and even obsolete parts you may need for your vehicle.
Guaranteed Fit - DIY Solutions ensures its selected parts are quality-tested to guarantee fit and function.
Assemblies may include halogen or incandescent test bulbs that should be replaced before installation.
Features and Benefits
Item Condition:
New
Attention California Customers:
WARNING: This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
Created on:
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
In this video, we're going to show you how to remove and put back in the bumper mounted driving or fog lights on this 2002 Toyota Tundra. The only tool you'll need is a 10 millimeter socket with a ratchet and 2 inch and 6 inch extensions. In this video, I do have the vehicle up on a lift, but that's not necessary; it just made it a whole lot easier to video for you.
If you're looking to change the bulb or change your fog light, you can see it's right back up in here. To change the bulb, all is you'll do is reach up in, twist it counter clockwise, and work the bulb out. You can see there's a little tab right here. Press the tab and pull the bulb out. Obviously, to reconnect, you push it in, make sure the tab locks down, put it back in, and turn it clockwise.
If you're looking to replace the whole assembly, there's three bolts; one there, one right there, and one on top there. Those bolts are 10 millimeters, so I'm going to use a 10 millimeter socket on a 6 inch extension and a ratchet. You can reach up and disconnect our lead first. For the top one, I'm going to use a smaller extension. The light in our truck is obviously in really good shape, so I'm just doing this to show you. Reinstallation is reverse. Be sure we don't get out harness stuck up in there. Pput the light up in. Make sure it goes on to all three of the studs. I'll just fast forward a little bit as I start those 10 millimeter nuts by hand. After you tighten it up, you can connect your lead.
We hope this helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
