Assemblies may include halogen or incandescent test bulbs that should be replaced before installation.
Features and Benefits
Direct Fit - No vehicle or wiring modification necessary
DOT, SAE, and FMVSS Compliant - Meets on-road use regulations
Matching set for a restored look
Item Condition:New
Attention California Customers:
WARNING: This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
The bulbs are for testing and not covered under our warranty. Our warranty applies to the light assembly only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
How to Replace Tail Light 2001-03 Chrysler Voyager
Created on:
Tools used
Flat Blade Screwdriver
Needle nose pliers
1. Remove the old tail light.
Use a flat blade screwdriver to pry out the rubber pins and pull them out with a pair of needle nose pliers.
Service the bulbs, or unplug the wiring harness and replace the tail light.
2. Install the new tail light
Plug in the wiring harness.
Clip the tail light into place.
Plug in the rubber pins.
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the internet.
Hi, I'm Mike Green. I'm one of the owners of 1A Auto. I want to help you save time and money repairing and maintaining your vehicle. I'm going to use my 20+ years experience restoring and repairing cars and trucks like this to show you the correct way to install parts from 1AAuto.com. The right parts installed correctly, that's going to save you time and money. Thank you and enjoy the video.
In this video, we'll be showing you taillight replacement, the bulb and the whole taillight itself on this 2003 Chrysler Voyager. This process is the same for any 2001 to 2007 Chrysler Voyager, Plymouth Voyager, Dodge Caravan, Grand Caravan, as well as the Chrysler Town and Country. The lights did changes slightly from 2003 to 2004, but the procedure to install them is still the same. Tools you'll need are a regular flat-blade screwdriver and a pair of needle-nose pliers.
For the taillight replacement, as you can see, this is your typical, everyday minivan. The array of children's seats and whatnot in the back. This is really pretty easy. There's two plugs right here. You want to take a screwdriver and start these plugs out a little bit. Get in there and twist the screwdriver a little bit. Ideally, you have a set of curved needle-nose pliers. Hook those on there, pry it out and the plug comes out. More likely, you've got straight needle-nose pliers. You can hook those on there like that, put your screwdriver in behind. Try not to pry in the light and pull that out. You don't want to pry on the light because you don't want to break the plastic. Keep that together.
Now you can see those pins are out and the light's loose and comes out. If you're just looking to replace bulbs, you squeeze these thumb tabs and the bulb comes out of its socket like that. If you are looking to replace the whole taillight, maybe you got into an altercation or something. There's a little red tab. Hopefully you can see it right there. Basically, you need a screwdriver and there's a tab on a tab that you press up to get that tab to slide a little bit. I'm prying up on the little tab and that red tab slides out. Then you press right up here next to the gray and unhook. Now your taillight is free. You can replace that if it was damaged. Obviously, you can get a new one at 1AAuto.com. The new one will be just like the original. It will go in and fit everything, plug right in.
Plug it back in. Push this red locking tab that way. There's a tab right here that goes into the fender. Put that in. Looking at it from the inside. Push the light in. Take your pin and put it in. Press the pin. If you want, use your screwdriver handle as a little hammer and then you're back in.
Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the internet. Feel free to call us toll free at 888-844-3393. We're the company that's here for you on the internet and in person.
CS087-U000R
In Stock
Product Reviews
Loading reviews
5.00/ 5.04
4 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
4
0
0
0
0
tail light replacement
Jack
March 12, 2017
the tail light arrived in excellent condition. and the do it yourself swap out in the vehicle went smoothly. i couldn't be happier.
Mary
March 21, 2017
Came in excellent condition. Easy instalment. Looks great on my vehicle! Overall, I'm very satisfied with this product and will be ordering again.
Tailight
P
September 26, 2017
Perfect fit and looks great. Just like the OEM as far as I can tell. Thanks for your help.
Great phone service
J
July 6, 2018
The part was great and the phone serve very helpful.
Customer Q&A
No questions have been asked about this item.
Customer service
877-844-3393
Monday - Friday 8:00am - 9:30pm ET Saturday - Sunday 8:00am - 4:30pm ET
Chrysler is a registered trademark of FCA US LLC. 1A Auto is not affiliated with or sponsored by Chrysler or FCA US LLC.See all trademarks.
Enter Vehicle Year Make Model
Specify your vehicle's year, make and model to guarantee fit.
Year
Make
Model
Options
Drivetrain
This part doesn’t fit a . Select from parts that fit.