Replaces
Part Details
Complete Repair in One Purchase - Stop searching for parts individually and complete your repair with a customized kit or set from DIY Solutions.
High-Quality Parts from Trusted Brands - DIY Solutions' kits and sets are selected from the best automotive brands and include hard-to-find and even obsolete parts you may need for your vehicle.
Guaranteed Fit - DIY Solutions ensures its selected parts are quality-tested to guarantee fit and function.
Assemblies may include halogen or incandescent test bulbs that should be replaced before installation.
Features and Benefits
Item Condition:
New
Attention California Customers:
WARNING: This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
Created on:
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Mike from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to replace marker on this 2002 Tacoma. You may want to do this if you have a bulb out or if you have cracked up your original light, or maybe your light is faded and dull and you want to put a nice new one on. The only tool you'll need is a Phillips screwdriver.
With your hood open, there's a Phillips screw right here on top. You remove that. Once that's removed you pull your light. You pull this up. Pull your parking light forward and then reach in behind and just twist counterclockwise on the socket. This bulb pulls right out.
Here's a new light from 1A Auto. See, it's nice and clear. If you got a broken one, it plugs right in. There's a tab here that goes in here. There is also a tab at the bottom that goes into the grille right here. Just make sure it's in at the bottom. This has to go under the fender up here. Make sure that tab goes in. Push it in nice and firm. Then make sure this all lines up and you can see the hole that's in the headlight. Screw started. Bring everything together. Then tighten it up.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
