Replaces
Assemblies may include halogen or incandescent test bulbs that should be replaced before installation.
Features and Benefits
Item Condition:
New
Attention California Customers:
WARNING: This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
The bulbs are for testing and not covered under our warranty. Our warranty applies to the light assembly only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
Created on:
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the internet.
In this video we're going to show you taillight replacement, both replacing the bulb itself as well as the whole assembly. This is a 2001 PT Cruiser, the same as any '01 to '05. The tools you'll need are a flat-blade screwdriver and/or a T27 torx bit with a driver.
To change out a taillight on a PT Cruiser you're really going to want a T27 torx bit and a driver or a large flat-blade screwdriver. There's a screw right down here that you have to remove. Once you remove that screw, pull off and pull back on the taillight. If you're just replacing the bulbs, they twist counterclockwise and pull out. The bulbs just pull out and go back in same as here. Many times you'll find if you can't get this screw out, usually the clip breaks inside. If that happens, what you can do is, and you might want to use a rag or something, gently pry up on the taillight back in here. Then you can work it up and off there.
You can see my bolt is still in here. It's a new light from 1A Auto. They mount exactly the same. The bulbs need a turn to lock. I'll remove my old clip. I just went to the hardware store and got a new clip. Put it back in place. Lights placed there. I'll start my new bolt in. Just tighten up the bolt. I use a little allen wrench to tighten it. Right into place.
We hope this helps you out. This video is brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the internet. Please free to call us toll free. 888-844-3393. We're the company that's here for you on the internet and in person.
