Replaces
Assemblies may include halogen or incandescent test bulbs that should be replaced before installation.
Features and Benefits
Item Condition:
New
Attention California Customers:
WARNING: This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
The bulbs are for testing and not covered under our warranty. Our warranty applies to the light assembly only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
Created on:
Tools used
Brought to you by 1A Auto.com, your source for quality replacement parts, and the best service on the internet. In this video we show you how to service the taillights on this 2004 Dodge Stratus, the same as any 2001 to 2006. This video will help you if you're just looking at changing the bulbs, or if you've had some damage to your taillight and you want to remove and replace the whole assembly. There are no tools required.
To replace a broken taillight, or to change a bulb, you want to just go in your trunk, and there's going to be a few thumb screws. One here. There's one right up here you can see, and one ... you kind of pull this back, and this back, and one right here. So I'm going to remove those three thumb screws. I'm fast forwarding here, because all I am doing is just kind of reaching in behind there, and removing those three thumb screws. Pull the light back. If you want to disconnect the light, what you can do is... if you're just looking to change bulbs, you turn the socket kind of clockwise, pull it out. The bulb pulls out, and replace it by pushing in.
And if you were looking to change to a new light from 1A Auto, you can see all the same... obviously this one's in fine shape, so I'm not going to replace it. There's a little red locking clip here. Push that out carefully with a flat blade screwdriver. And if that's out, you just press the tab here, and disconnect. Take that off. Same thing right here. Press the tab, disconnect. And then you would just transfer your harness. These pins pull out. This pulls out here, and you transfer it onto your new light. And then reinstall, and reinstall. It's pretty easy. Reconnect. This clip goes right on there. Push that locking pin. Clip back in. Make sure that harness goes back in. Guide the light. And then put your thumb screws back on.
We hope this helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts, and the best service on the internet. Please feel free to call us toll free 888-844-3393. We're the company that's here for you on the internet and in person.
