Replaces
Assemblies may include halogen or incandescent test bulbs that should be replaced before installation.
Features and Benefits
Item Condition:
New
Attention California Customers:
WARNING: This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
Created on:
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the internet.
Hi. I'm Mike Green. I'm one of the owners of 1A Auto. I want to help you save time and money preparing and maintaining your vehicle. I'm going to use my 20 plus years' experience restoring and repairing cars and trucks like this to show you the correct way to install parts from 1AAuto.com. The right parts installed correct is going to save you time and money .Thank you. Enjoy the video.
In this video we're going to replace the taillights on this 2004 Ford Ranger. This is basically the same procedure for a 1993 on up. All you need is a Phillips screwdriver.
This is a 2004 Ford Ranger, the same as many years of Ranger. The taillight replacement is pretty easy. There are four screws, one, two and then on the outside three and four. Remove those. Once you have those screws out, it pulls off. The lower one you can turn and pull it out. This upper one you have to actually press this thumb tab and remove the connector. Then this part can come out and you can service it.
You can see the original light is from 1A Auto. It's all the same. It's a little nicer and shinier. Everything's going to mount the same and all that. This one's in good shape. We're going to put it back in. Obviously to put it in it's reversing the procedure. There's actually a little tab that goes in the slot right here. You want to tighten them but not too tight. They just need to be firm and snug. There you go.
We hope this helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the internet. Please feel free to call us toll free. 888-844-3393. We're the company that's here for you on the internet and in person.
