Matched TRQ Kit: Fit, lab, and road tested for peak performance
Application Specific Design: No modifications necessary
Heat Range and Life Cycle Tested: Exact match to stock specifications
Complete repair to restore your engine to like-new conditions
Returns: Parts with electrical components cannot be returned once installed.
Attention California Customers:
WARNING: This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
Returns: Parts with electrical components cannot be returned once installed.
How to Replace Spark Plug Wire Set 2001-04 Ford Escape
Created on:
Tools used
No Tools Needed
1. Removing the Spark Plug Wire
Pull and twist the spark plug wire up
Remove the wire from the clip and the ignition coil
2. Installing the Spark Plug Wire
Insert the spark plug wire into the ignition coil
Press the spark plug wire into the spark plug wire
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet!
Hi, I'm Mike from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to replace the spark plug wires on this 2002 Ford Escape. It's the same part and similar process on these escapes, from 2001 to 2004. The only item you'll need for this is new spark plug wires from 1AAuto.com.
Pull up the first spark plug wire. Then you want to pull and twist the same time. Then pull off the top of this clip. Pull the spark plug wire free and then disconnect it from the ignition coil.
Take your new spark plug wire and you want the longest one for this spot. Connect it to the ignition coil. Push it back down into that clip and then push the spark plug wire back down over the spark plug.
You'll want to make sure it's pushed all the way down, then you should feel it click onto the spark plug. Then repeat the process on the other spark plug wires just doing one at a time so you don't get them mixed up.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
TKA01263
In Stock
Product Reviews
Loading reviews
There are no reviews for this item.
Customer Q&A
No questions have been asked about this item.
Customer service
877-844-3393
Monday - Friday 8:00am - 9:30pm ET Saturday - Sunday 8:00am - 4:30pm ET
Ford is a registered trademark of Ford Motor Company. 1A Auto is not affiliated with or sponsored by Ford or Ford Motor Company.See all trademarks.
Enter Vehicle Year Make Model
Specify your vehicle's year, make and model to guarantee fit.
Year
Make
Model
Options
Drivetrain
This part doesn’t fit a . Select from parts that fit.