Kit Includes: (1) Heater Blower Motor (1) Heater Blower Motor Resistor
Specification
Vehicle Heating & A/C Option
with Automatic Temperature Control
Left Hand Drive:
All of our auto parts are intended for Left Hand Drive USDM vehicles. If your vehicle is Right Hand Drive, please ensure the part is correct for your specific vehicle.
Item Condition:New
Attention California Customers:
WARNING: This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
Returns: Parts with electrical components cannot be returned once installed.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
How to Replace Blower Motor 2002-08 Dodge Ram 1500
How to Replace HVAC Blower Motor Assembly 1999-2004 Jeep Grand Cherokee
How to Replace Blower Motor 2002-08 Dodge RAM 1500
Created on:
Tools used
T20 Driver
1. Removing the Blower Motor
Remove the three T20 torx screws.
Pull the motor down and out.
Disconnect the lead on the back of the motor.
2. Replacing the Blower Motor
Push the motor up into place.
Replace the three T20 screws.
Reconnect the lead on the motor.
Brought to you by 1AAuto.com, your source for quality replacement parts, and the best service on the internet.
In this video, we're going to show you how to replace the AC and heater fan motor on this 2004 Dodge Ram. Generally if your fan just stops working, that's usually a sign that the blower motor has burnt out. Also, please just check your fuse beforehand before you go replacing the blower motor. If you just lose a speed or two, in your fan, that's your resister, and check out our other video for that. The only tool you'll need is either a T20 torx driver or an 8mm socket and ratchet.
Your fan is right here just inside the passenger door at the passenger's feet. It's right down here. It's held in by T20 torx screws. Okay. I'll speed up going through this. They actually are, also, 8mm bolts, so you could use an 8mm socket with a ratchet and extension. All right. Then the motor comes down. Just push on your kick panel a little bit. It comes down, and then here is your lead. Push nice and firm right there. Pull it out. And the motor's out.
Here's our original fan. New fan from 1A Auto. You can see everything's all the same. The new fan from 1A Auto is just newer, and it's going to work for you. So all the same. You can see that the connections are exactly the same. It's going to bolt in, hook up, and work just fine. So the first thing I'm going to do is take my lead, and just kind of make sure it's really out of my way. Then just put the fan up in here. It's got kind of a triangle over on that side that goes kind of towards the inside of the vehicle and towards the front. Put it up in. Start my easiest screw here first.
And we'll speed it up here, as we just feed the other two screws in, and then tighten them up with our torx driver, and again you can use an 8mm socket and ratchet with extension if you want to. Then you tighten them up firm. They don't have to be extremely tight. You are just going into plastic. And then plug in our lead. Turn on our key. Working well.
We hope this helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts, and the best service on the internet. Please feel free to call us toll free, 888-844-3393. We're the company that's here for you on the internet and in person.
Tools used
Gloves
Socket Extensions
Socket Driver
Phillips Head Screwdriver
8mm Socket
Ratchet
Trim Tool Set
Safety Glasses
Tools used
T20 Driver
All right, friends. To get started on our blower motor, we're gonna come right underneath the passenger side of the dash along this kick panel, and you're gonna find some wiring. Go ahead and squeeze on the tab for your connector, give it a little wiggle, and pull this right down. Take a peek, make sure you don't see any funny colors. This looks great, let's set it aside. On your blower motor, you're gonna see three mounting bolts. You're gonna need a Torx head bit to get these out, so go ahead and grab that, remove all three bolts, and then we'll remove the blower motor. All right. Let's go ahead and pull this out. There it is, friends.
All right. Now, it's gonna be time to get our brand new blower motor in here. Something that I want you to pay attention to is this area right here. If you look at it, you can see it sticks out much further than the other mounting holes. With that said, put this facing towards the driver side, and now we'll get this right up and in here. Good, that's situated perfectly. Start in all three of your bolts and then snug them up. That looks great. Let's connect in our wiring here. Push it in, listen for a click, give it a nice tug. Now all you need to do is test it out.
HMA80212
In Stock
Product Reviews
Loading reviews
5.00/ 5.03
3 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
3
0
0
0
0
Blower kit
Scott
December 20, 2017
Kit was the right parts and complete and the best price.
The video was very helpful.
1A auto comes through again.
East fix with this kit
robert
May 4, 2019
This kit has everything I needed to fix the heater/air conditioning in my 2003 jeep Grand cherokee. Everything works perfectly now. Although it does take some time to install it was totally worth the effort. Dose not have instructions but there are numerous videos out there to show you exactly what to do. Great kit.
K
November 14, 2020
The parts came early perfect fit works perfectly. I will differently tell my friends and be ordering all my parts from you. The prices are great . Thank you
Customer Q&A
No questions have been asked about this item.
Customer service
877-844-3393
Monday - Friday 8:00am - 9:30pm ET Saturday - Sunday 8:00am - 4:30pm ET
Jeep is a registered trademark of FCA US LLC. 1A Auto is not affiliated with or sponsored by Jeep or FCA US LLC.See all trademarks.
Enter Vehicle Year Make Model
Specify your vehicle's year, make and model to guarantee fit.
Year
Make
Model
Options
Drivetrain
This part doesn’t fit a . Select from parts that fit.