Replaces
Part Details
Product Features
Complete Repair in One Purchase - Stop searching for parts individually and complete your repair with a customized kit or set from DIY Solutions.
High-Quality Parts from Trusted Brands - DIY Solutions' kits and sets are selected from the best automotive brands and include hard-to-find and even obsolete parts you may need for your vehicle.
Guaranteed Fit - DIY Solutions ensures its selected parts are quality-tested to guarantee fit and function.
Assemblies may include halogen or incandescent test bulbs that should be replaced before installation.
Item Condition:
New
Attention California Customers:
WARNING: This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii and Alaska.
Shipping is not available to a P.O. Box, APO/FPO/DPO addresses, US Territories, or Canada for this item.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii.
Final shipping costs are available at checkout.
Created on:
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Don from 1A Auto. I hope this how-to video helps you out, and the next time you need a part for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to service the bulbs as well as replace the entire taillight assembly on this 2004 Jeep Liberty. We show you on the driver side, but the passenger side is the similar procedure. It's the same part and similar process on these Liberties from 2002 to 2004. The only items you'll need include new taillights from 1AAuto.com and a T20 Torx driver.
For your passenger side taillight, the two T20 Torx bolts holding it in are right here, but for the driver side, you're going to have to go through right here, here, and one right here. We're just going to fast-forward as Don removes both of those. Once those removed, the taillight will pull right out.
Pull the harness clip from the bottom of the taillight. Push the tab and disconnect the harness. To service the bulbs, you just twist these sockets counterclockwise and pull them out. You can pull the bulb out. Push your new bulb in and twist the socket clockwise back into place. The other two are the same procedure.
On the left is the old taillight; on the right is the new one from 1A Auto. You can see they're identical, and they're going to fit exactly the same. Line up this pin with this hole and just push the taillight back into place. Then replace those two T20 bolts, and it helps to put them onto the driver. Feed it back into place and just twist it in. We'll just fast-forward as Don replaces both of those bolts. Once you're done with that, you're all set.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
