Replaces
Replaces Jeep Liberty Catalytic Converter Davico Mfg 1AEEK01410
$564.52
Replaces Jeep Dodge Ram Chrysler Valve Body Solenoid Mopar 68353383AB
$469.95
Replaces Jeep Liberty Front & Rear 12 Piece Steering & Suspension Kit TRQ PSA32047
$375.95
Replaces Jeep Dodge Alternator ACDelco 335-1287
$357.95
Replaces 2005 Jeep Liberty Front 12 Piece Steering & Suspension Kit TRQ PSA66529
$357.95
Replaces 2005-07 Jeep Liberty Front 10 Piece Steering & Suspension Kit TRQ PSA60022
$350.95
Replaces 2005-07 Jeep Liberty Front 6 Piece Control Arm with Ball Joint Set TRQ PSA56377
$309.95
Replaces 2002-07 Jeep Liberty Front Ceramic Performance Brake Pad & Rotor Kit with Calipers & Hoses TRQ Performance BKA34020
$309.95
Replaces 2002-07 Jeep Liberty Front Semi-Metallic Performance Brake Pad & Rotor Kit with Calipers & Hoses TRQ Performance BKA34019
$306.95
Replaces Jeep Liberty Wrangler Rear Driver & Passenger Side Brake Rotor Backing Plate 2 Piece Set Dorman OE Solutions 924-657
$305.95
Part Details
TRQ side mirrors and mirror components are designed to match the function, fixture, and performance of the original version for easy installation. TRQ mirrors are DOT certified, comply with all federal safety standards, and are independently lab tested to ensure our products comply with all government regulations. All products are fit and road-tested in our Massachusetts R&D facility to ensure we deliver on our promise of Trusted Reliable Quality.
Product Features
Exact fit - To obtain proper fit and function confirm your vehicle has the exact mirror options listed.
Item Condition:
New
Attention California Customers:
WARNING: This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
Created on:
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the internet. Hi, I'm Don from 1A Auto. I hope this how-to video helps you out, and then next time you need a part for your vehicle, think of 1AAuto.com. Thanks. In this video, we show you how to remove and replace the side mirrors on this 2006 Jeep Liberty. It's the same part and process on these Liberties from 2002 to 2007. We show you on the driver's side, but it's the same procedure on the passenger side.
The tools you'll need for this is new side mirror from 1AAuto.com, a flat blade screwdriver, a Phillips screwdriver, and a 10 mm socket and ratchet. Start off by prying out this little panel behind your door handle. Now remove this Phillips screw and this one down in your pull cup. We'll just fast forward as Don does this. Now pull out around the door handle to release the clips. When you get to the top, pry the door panel out. Once the clip pops free, pull the door panel up and off. On the back of your door panel, you want to release the clip on your door handle rod and pull the door handle rod down and out. Then you want to push the tabs on both harnesses and release them. Push the tab on the mirror harness and disconnect it. Then you want to remove these three 10 mm bolts.
We'll just fast forward as Don does this. Once those are removed, pull the mirror out and off. The one on the left is the old mirror. The one on the right is the new mirror from 1A Auto. You can see they're identical, and they'll mount exactly the same. Run your harness for your new mirror back through the door and push the mirror studs into place. We'll fast forward here as Don replaces those three 10 mm bolts and tightens them up. Then reconnect your harness. Now to replace your door panel, push the harnesses back into place. Push the door handle back into place and re-clip it. Then line your door panel up and push it down onto the window sill and over that lock. Now make sure your clips are lined up and hit them in around the door panel. We'll just fast forward here as Don replaces those two Phillips screws and replaces that little panel behind the door handle.
We hope this video helps you out. Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the internet. Please feel free to call us toll free: 888-844-3393. We're the company that's here for you on the internet and in person.
