Kit Includes: (1) Passenger Side Outer Tail Light (1) Driver Side Outer Tail Light
Quantity: 2 Piece
Specification
Side Location
Driver & Passenger Side
Location
Outer
Product Features
Direct Fit - No vehicle or wiring modification necessary
DOT, SAE, and FMVSS Compliant - Meets on-road use regulations
Matching set for a restored look
Complete Repair in One Purchase - Stop searching for parts individually and complete your repair with a customized kit or set from DIY Solutions.
High-Quality Parts from Trusted Brands - DIY Solutions' kits and sets are selected from the best automotive brands and include hard-to-find and even obsolete parts you may need for your vehicle.
Guaranteed Fit - DIY Solutions ensures its selected parts are quality-tested to guarantee fit and function.
Assemblies may include halogen or incandescent test bulbs that should be replaced before installation.
Item Condition:New
Attention California Customers:
WARNING: This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
How to Replace Tail Light 2003-05 Chevy Cavalier
Created on:
Tools used
Flat Blade Screwdriver
10mm Socket
Ratchet
1. Replacing a Bulb
Remove the clip.
Pull back the insulation.
Twist the socket counterclockwise and out.
Pull the bulb straight out.
Push a new bulb in.
Twist the socket clockwise.
2. Remove the Taillight Assembly
Twist out all of the sockets.
Remove the three 10mm nuts.
Pull the taillight out.
3. Replacing the Taillight Assembly
Line up the taillight and push it into place.
Replace the three 10mm nuts.
Twist in all of the sockets.
Replace the insulation.
Replace the clip.
Brought to you by 1AAuto.com, your source for quality auto replacement parts and the bets service on the internet.
Hi, this is Mike from 1A Auto. I hope this how to video helps you out. Next time you need parts for your vehicle, think of 1AAuto.com. In this video, we're going to show you how to service a taillight, both if you just need to change a bulb in a taillight or if you need to replace one because it's been broken. The only tools you'll need if you're just going to change the bulb, you'll need a flat blade screwdriver. If you're looking to replace the whole taillight, you'll need a flat blade screwdriver as well as you'll need a 10 millimeter socket, preferably a deep socket and a ratchet.
Okay, to service the taillight, you open the trunk. There is a clip right here that probably going to come up pretty easy. Probably need to use a screwdriver or something. Pull that clip out. This installation comes down. If you're just looking to change a taillight bulb, you should be able to twist this counterclockwise and out and your bulb just pulls right out and back in. Okay, also there's another small light right up in here. You can reach in, turn it counterclockwise, pull it out. Again, that bolt just pulls right straight out and back in. If you are looking to replace your whole assembly, then there's three nuts right here that hold it. A 10 millimeter socket, put it on there and put the ratchet in place. I'm going to speed it up here as I remove those three speed nuts. It will help if you have a longer or a deep socket to do these studs on the taillight. They are long.
This is our original light. New light from 1A Auto. Okay, you can see everything is the same. On the back side, the new light from 1A Auto comes with the gasket and everything. My original is fine. I am just going to reinstall that and obviously reinstallation is just the reverse of the procedure. Look in, make sure it goes in correctly. These nuts, when you put a new light in, they're called speed nuts and they actually cut right in to the studs. They are actually a little. They give some resistance. They're not that difficult to tighten up. I'll speed it up here again as I tighten up those nuts. With the speed nuts, you do want to push with wrench, you want to push with the nuts and push it onto the stud as the nut cuts in. Again, that's what keeps the nut on the stud as it actually cuts right into it. Make sure they're bolted back in. The light come in and lock it in place. Work it in then lock it in place. Okay, put your trim panel back up in place and put this on and back in.
We hope this helps you out. Brought to you by www.1AAuto.com, your source for quality auto replacement parts and the bets service on the internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the internet and in person.
LHT07325
In Stock
Product Reviews
Loading reviews
4.00/ 5.01
1review
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
0
1
0
0
0
OEM parts fit as expected
J
December 30, 2017
Parts were in good shape and fit perfectly but did not include mounting "nuts". Had to retrieve, repair and reuse old ones. Fortunately I found them all.
Customer Q&A
No questions have been asked about this item.
Customer service
877-844-3393
Monday - Friday 8:00am - 9:30pm ET Saturday - Sunday 8:00am - 4:30pm ET
Chevrolet is a registered trademark of General Motors Company. 1A Auto is not affiliated with or sponsored by Chevrolet or General Motors Company.See all trademarks.
Enter Vehicle Year Make Model
Specify your vehicle's year, make and model to guarantee fit.
Year
Make
Model
Options
Drivetrain
This part doesn’t fit a . Select from parts that fit.