Replaces
Complete Repair in One Purchase - Stop searching for parts individually and complete your repair with a customized kit or set from DIY Solutions.
High-Quality Parts from Trusted Brands - DIY Solutions' kits and sets are selected from the best automotive brands and include hard-to-find and even obsolete parts you may need for your vehicle.
Guaranteed Fit - DIY Solutions ensures its selected parts are quality-tested to guarantee fit and function.
Assemblies may include halogen or incandescent test bulbs that should be replaced before installation.
Features and Benefits
Item Condition:
New
Attention California Customers:
WARNING: This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
Created on:
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the internet.
In this video we're going to show you how to service the taillight on this 2003 Saturn Ion sedan. The procedure's the same for any 03-07 sedan. The only tool you'll need is a T10 torx driver.
Okay, servicing the bulbs or changing the whole taillight is pretty easy on these Ions. You need a T10 torx driver, and there's three screws one there, one in the middle and one down here. Okay, just do a little fast forward as I remove those three screws. With the screws out, the light just kind of slides back out. If you're just looking to replace the bulbs just twist them counterclockwise, this one and then this one, all counterclockwise as they come out. Take that off right there. To replace one of these bulbs you just pull it straight out and push it back in. This one also just pull straight out, pushes back in. A new taillight from A1 Auto looks exactly like the original. Everything's going to go together like the original. To put the bulbs in twist clockwise to lock, goes in clockwise to lock, and this bulb clockwise to lock. Put your clip right back on here, and the light slides out. This part right here slides in behind. Just make sure that everything There's a clip over here, there's a couple of pins on the side that go into the vehicle. Just make sure everything goes together correctly. This slides in there.
We'll kick it into overdrive again here as I put those screws back in.
We hope this helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the internet. Please feel free to call us toll free, 888-844-3393. We're the company that's here for you on the internet and in person.
