Kit Includes: (1) Passenger Side Tail Light (1) Driver Side Tail Light
Quantity: 2 Piece
Specification
Side Location
Driver & Passenger Side
Product Features
Direct Fit - No vehicle or wiring modification necessary
DOT, SAE, and FMVSS Compliant - Meets on-road use regulations
Matching set for a restored look
Complete Repair in One Purchase - Stop searching for parts individually and complete your repair with a customized kit or set from DIY Solutions.
High-Quality Parts from Trusted Brands - DIY Solutions' kits and sets are selected from the best automotive brands and include hard-to-find and even obsolete parts you may need for your vehicle.
Guaranteed Fit - DIY Solutions ensures its selected parts are quality-tested to guarantee fit and function.
Assemblies may include halogen or incandescent test bulbs that should be replaced before installation.
Item Condition:New
Attention California Customers:
WARNING: This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
How to Replace Tail Lights 2004-08 Chrysler Pacifica
Created on:
Tools used
Flat Blade Screwdriver
10mm Socket
Ratchet
1. Remove the Tail Light Assembly.
Pop the trunk.
Remove the two 10 mm bolts on the side of the tail light.
Pull the tail light out.
Service the bulbs or unplug the harness and remove the tail light assembly.
Remove the wiring harness clip from the tail light assembly and transfer to the new tail light assembly.
2. Install the New Tail Light Assembly
Plug in the bulbs and wiring and clip them in with the transferred harness clip
Plug the wiring harness into the vehicle
Clip the tail light assembly into place
Bolt in the two 10 mm bolts.
Close the trunk and enjoy!
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the internet. Hi, I'm Mike from 1A Auto. I hope this how-to video helps you out. Next time you need parts for your vehicle, think of 1AAuto.com, thanks.
In this video we're going to show you how to service a tail light on this Chrysler Pacifica. We'll show you both if you just need a change of bulb, what's the process for that, as well as if you need to install a new tail light because yours is broken. At 1AAuto.com we sell very nice new replacements. Pretty easy process, you'll need a 10 millimeter socket with a ratchet and s small screwdriver. On either side when you open up your tail gate you'll see two bolts that hold in your tail light, 10 millimeter socket ratchet like this or 10 millimeter wrench. I recommend the socket ratchet because this can be a little difficult to get out sometimes.
I'll fast forward here, as we speed up and remove those two bolts. Once you have those out, you shake your light around a little bit. Pull up and out. If you just look in the change of bulb, all these bulbs they just twist counterclockwise and come out. Bulbs, you just it pull straight out, and that in. If you have a broken tail light you'll want to take out this, move this little red connector, push it up like that. Then there's a tab right here, press that tab and disconnect your light. You'll need to transfer your harness over to the new light so you'll want to work this out, just use that small screwdriver to try push these clips through.
Let me speed it up here. Those clips are a little bit of a pain. You just pull on that connector from one side then use your screwdriver to push on the other side. If you want to you could cut a corner by just pulling the connector off and leaving the clip behind, then your connector will kind off flopping there and could rattle in the quarter panel of the vehicle, but sometimes getting those clips out could be a little bit frustrating.
Okay, just turn all of these. Again, I said turn counterclockwise. The new light from 1A Auto; put this one in first, twist the lock, twist the lock, and reinstall that right in there. Plug in there, lead, and then push the lock, put the light in place just kind of peek back in here if the lamp is pinned, just push it in. I'll speed it up from here on out. Just tightening up those bolts nice and firm, you don't want to over tight them, you don't want to break the light, but get them on there nice and tight so it doesn't rattle.
We hope this helps you out, brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the internet. Please feel free to call us toll-free, 888-844-3394. We're the company that's here for you on the Internet and in person.
LHT07578
In Stock
Product Reviews
Loading reviews
There are no reviews for this item.
Customer Q&A
No questions have been asked about this item.
Customer service
877-844-3393
Monday - Friday 8:00am - 9:30pm ET Saturday - Sunday 8:00am - 4:30pm ET
Chrysler is a registered trademark of FCA US LLC. 1A Auto is not affiliated with or sponsored by Chrysler or FCA US LLC.See all trademarks.
Enter Vehicle Year Make Model
Specify your vehicle's year, make and model to guarantee fit.
Year
Make
Model
Options
Drivetrain
This part doesn’t fit a . Select from parts that fit.