Replaces
Part Details
Highest Quality Materials
Made from highest quality materials that meet or exceed OEM standards
Quality Tested - built to a strict level of product standards.
Item Condition:
New
Attention California Customers:
WARNING: This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
Returns: Parts with electrical components cannot be returned once installed.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
Created on:
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Mike from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to replace the blower motor on this 2005 Ford F150. It's the same part and similar process on these F150s from 2004 to 2008. The items you'll need for this is a new blower motor from 1AAuto.com and an 8 millimeter socket and ratchet.
Your blower motor is located right here. It's held in with these three 8 millimeter bolts. Then disconnect the harness by pulling down on the tab and pushing it off. Then use an 8 millimeter wrench or a socket and ratchet to remove those three 8 millimeter bolts. Once those are removed, just pull the blower motor down as far as you can and then pull back the carpeting, and just maneuver it down and out and over the carpeting.
On the left is the new blower motor from 1AAuto.com. On the right is the old one. You can see they're identical, and they'll fit exactly the same. Take your new blower motor and feed it up into place. You push it in against the carpet as much as you can. Once you get to a certain point, you'll want to pull the carpet back to give yourself a little bit extra room. Then just kind of push it into the insulation and up at the same time, and it'll go into place. Then turn it once you get it up in place so that the holes line up.
Once you get it lined up, just replace those bolts and tighten them up. If you want to speed up the process of tightening them up, you can use an air ratchet, but you want to make sure that you don't over-tighten them, so just tighten them most of the way, and then tighten them the rest of the way using your socket and ratchet. You just want them hand tight. Reconnect your harness.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
