Replaces
Part Details
Assemblies may include halogen or incandescent test bulbs that should be replaced before installation.
Features and Benefits
Item Condition:
New
Attention California Customers:
WARNING: This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii and Alaska.
Shipping is not available to a P.O. Box, APO/FPO/DPO addresses, US Territories, or Canada for this item.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii.
Final shipping costs are available at checkout.
Created on:
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet. Hi, I'm Don from 1A Auto. I hope this how-to video helps you and the next time you need a part for your vehicle think of 1AAuto.com. Thanks. In this video, we show you how to the replace the taillight assembly as well as change the taillight bulbs on this 2006 Jeep Liberty and it's the same part and process on these Liberty's from 2005 to 2007. The only items you'll need for this is a new taillight assembly from 1AAuto.com and T20 Torx bit and a ratchet with an extension.
The taillights held in by two T20 Torx bolts and we'll just fast forward as Don removes both of these. Once those are removed, pull out on the taillight. Lean it back. Now to service your bulbs, you just twist out the socket, pull the bulb out, push your new bulb into place and twist it back in. It's the same for all three sockets. To disconnect your assembly, pull the harness from the taillight and then push this red clip out. Then push the tab on the harness and pull it free. On the left is the old taillight assembly. On the right is the new one from 1A Auto. You can see they're identical and they'll mount exactly the same.
Connect your new taillight and then push that red clip back in. Line up these two tabs with the two holes on the vehicle and push them in place. Making sure your harness is tucked behind the taillight. We'll just fast forward here as Don replaces those two T20 Torx bolts. We've shown you how to do the right rear taillight and we're going to show you how to access the fasteners for the left rear taillight. Go ahead in through here. I'm going to use the same T20 bit, I'm going to use a long extension and you can see, you're going to go in right through here to access the upper one and down here to access the lower one. Aside from that, the operation in changing the taillight light bulbs and changing the assembly is exactly the same as the right side. We do offer two types of taillights at 1A Auto. We have the regular replacement light as you can see here and we also have these taillights with the guard on them.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll free 888-844-3393. We're the company that's here for you on the Internet and in person.
