Replaces
Assemblies may include halogen or incandescent test bulbs that should be replaced before installation.
Features and Benefits
Item Condition:
New
Attention California Customers:
WARNING: This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
The bulbs are for testing and not covered under our warranty. Our warranty applies to the light assembly only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
Created on:
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Don from 1A Auto. I hope this how-to video helps you out, and the next time you need a part for your vehicle, think of 1AAuto.com. Thanks.
In this video, we show you how to replace the parking lights on this 2006 Jeep Liberty. It's the same process on these Liberties from 2005 to 2007. You'll need new parking lights from 1AAuto.com, a T15 Torx bit and ratchet, and a flat blade screwdriver.
Right here, there is one T15 bulb. Just go ahead and remove that. I'll fast-forward as Don does this. Once it's removed, pull it out and pull the tab out of the slot on the side. To disconnect it, pry up the red clip. Push on the tab on the other side and pull the harness free.
On the right is the old parking light; on the left is the new one from 1A Auto. You can see they're identical, and will mount exactly the same. The new one obviously looks a lot better. Connect your harness to your new parking light and push that red tab in. Then, align the tab on the side into that slot. Push your parking light into place and replace that T15 bolt. I'll fast-forward as Don does this. Once that's tightened up, you're all set.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
