Replaces
Part Details
Genuine original equipment part (OEM) that was factory installed on your vehicle by the manufacturer.
Assemblies may include halogen or incandescent test bulbs that should be replaced before installation.
Item Condition:
New
1 Year Warranty
This item is backed by our 1-year warranty. In the event this item should fail during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
Created on:
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Mike from 1AAuto. We've been selling auto parts for over 30 years! We're dedicated to delivering quality auto parts, expert customer service, and fast and free shipping, all backed by our 100% satisfaction guarantee. We've created thousands of videos to help you install our parts with confidence. That saves you time and money, so visit us at 1AAuto.com, your trusted source for quality auto parts.
In this video, we're going to be working with our 2012 GMC Acadia. We're going to replace the outer tail light assembly here. This is on the passenger's side, but this process is going to be exactly the same on the driver's side. This is an LED assembly, meaning if it burns out, you change the whole housing. There's no bulb in there for you to switch.
If you like this video, please click "Subscribe." We have a ton more information on this vehicle, as well as many other makes and models. If you need this part for your vehicle, you can follow the link down in the description over to 1AAuto.com.
Here are the items you'll need for this repair: 7mm socket, ratchet, socket extension, and flat blade screwdriver.
Open your tailgate. Using a small flat blade screwdriver, carefully remove the covers for the hardware that secures the tail light into place. Remove the two screws located down inside of these holes with the 7 millimeter socket, ratchet, and extension. Pull the tail light housing straight back, and use the small flat blade screwdriver to carefully pry up on this connector. Remove it from the back of the outer tail light assembly.
To install your new outer tail light assembly, simply plug it back in. Line up these pins with the corresponding holes here in the quarter panel. Snap it back into place and reinstall your two 7 millimeter screws. Line up the plastic covers and snap them back into place. Check for proper operation of your tail lights, close your tailgate, and you're good to go.
Thanks for watching. Visit us at 1AAuto.com for quality auto parts, fast and free shipping, and the best customer service in the industry.
