Replaces
Part Details
Product Features
Complete Repair in One Purchase - Stop searching for parts individually and complete your repair with a customized kit or set from DIY Solutions.
High-Quality Parts from Trusted Brands - DIY Solutions' kits and sets are selected from the best automotive brands and include hard-to-find and even obsolete parts you may need for your vehicle.
Guaranteed Fit - DIY Solutions ensures its selected parts are quality-tested to guarantee fit and function.
Assemblies may include halogen or incandescent test bulbs that should be replaced before installation.
Item Condition:
New
Attention California Customers:
WARNING: This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii and Alaska.
Shipping is not available to a P.O. Box, APO/FPO/DPO addresses, US Territories, or Canada for this item.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii.
Final shipping costs are available at checkout.
Created on:
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Mike from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to service the bulbs as well as replace the entire tail light assembly on this 2010 Buick Enclave. We show you on the passenger side, but the driver side is the same procedure. The items you'll need for this are new tail lights from 1AAuto.com, flat blade screwdriver, 7mm socket, and a T25 Torx bit or driver.
Open up your trunk. There's two covers right here. Using your flat blade screwdriver, just pry them open and slide the cover up. It'll flip down. Behind those covers there are two 7mm bolts. Just go ahead and remove both of those. We'll fast-forward as Mike does that. Pull the tail light out and service your bulbs.
You just push in on the tab on this and twist it counterclockwise. Pull the bulb out, push your new bulb in, twist the socket back in clockwise, and lock it. For this one up here, the same thing. Twist it counterclockwise, pull the bulb out, push your new bulb in, and twist it back in clockwise. You do have to line up your tabs as you push it back in.
Next, we'll show you how to replace your whole assembly if it's broken. Just pull the tab on that harness and pull the assembly free. Remove this T25 and these two T25s. We'll fast-forward as Mike removes those three screws. Once you've removed all three of them, this panel pulls free.
Put the panel on your new tail light. Once you have it lined up, replace those three T25 screws. Connect the harness to your tail light and line up this tab into here. Once you've got the tail light lined up, push it back into place. Replace those two 7mm bolts. We'll fast-forward as Mike tightens those up. Once they're tightened up, take your cover, pull it up, and push it back down into place. Push it in until it clicks. Once they're both pushed in, you're all set.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
