Kit Includes: (1) Passenger Side Tail Light (1) Driver Side Tail Light
Quantity: 2 Piece
Specification
Side Location
Driver & Passenger Side
Product Features
Direct Fit - No vehicle or wiring modification necessary
DOT, SAE, and FMVSS Compliant - Meets on-road use regulations
Matching set for a restored look
Complete Repair in One Purchase - Stop searching for parts individually and complete your repair with a customized kit or set from DIY Solutions.
High-Quality Parts from Trusted Brands - DIY Solutions' kits and sets are selected from the best automotive brands and include hard-to-find and even obsolete parts you may need for your vehicle.
Guaranteed Fit - DIY Solutions ensures its selected parts are quality-tested to guarantee fit and function.
Assemblies may include halogen or incandescent test bulbs that should be replaced before installation.
Item Condition:New
Attention California Customers:
WARNING: This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii and Alaska.
Shipping is not available to a P.O. Box, APO/FPO/DPO addresses, US Territories, or Canada for this item.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii.
Final shipping costs are available at checkout.
How to Replace Tail Lights 2008-12 Dodge Caliber
Created on:
Tools used
Flat Blade Screwdriver
1. Removing the Tail Light
Open the trunk
Remove the two clips from the side of the tail light with a flat blade screwdriver
Pull straight out on the tail light
2. Servicing the Bulbs
Twist the bulb socket counterclockwise out the light
Pull the bulb off of the socket
Push on the new bulb
Twist the bulb clockwise into the light
3. Replacing the Tail Light Bulbs
This step is only necessary if you are replacing the tail light bulbs
Turn the base of the bulbs counterclockwise
Remove the old bulbs
Disconnect the wiring harnesses from the old bulbs
Insert the new bulbs
Turn the base of the new bulbs clockwise
Connect the new bulb to the wiring harness
4. Installing the New Tail Light
Line up the bolt holes on the tail light bracket to the bolt holes on the vehicle
Replace the clips into the tail light bracket
Close the trunk
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Mike from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to service your taillight bulbs as well as replace the entire taillight assembly. We show you on the passenger's side, but the driver's side is the same procedure. The items you'll need for this include new taillights from 1AAuto.com and a flat blade screwdriver.
Start off by opening your trunk. On the side of the taillight you'll see these two clips. To remove them, you just pry out the center with a flat blade screwdriver. The clip pulls right out. If you do have difficulties removing them, you can use wire cutters and just don't cut. Slide them underneath the clip and pry it out that way.
Once the clips are removed, just pull straight out on the taillight and it'll pull free. To service your bulbs, just twist the socket and pull the bulb right out. Push the new bulb in and twist the socket back into place. For the lower bulb it's the same thing; twist it out, pull the bulb out, push your new one in, and twist the socket back into place.
Now, to change the entire assembly, you want to twist that socket out and then pry out this red clip. That will allow you to push down on the tab on the harness and free it from the socket. You can just put the socket back into place in the light for now. Then, on the lower bulb, the same thing: twist out the socket, pull out the red clip, and then disconnect the socket. Again, twist that back into your taillight.
On the left is the old taillight; on the right is the new one from 1A Auto. You can see they're identical, and they're going to mount and connect exactly the same. Reconnect the harnesses to the sockets on your new taillight, and push those red clips in to lock it. Then line up these two studs with the holes on the vehicle. Then just push them into place. Then take your clips with the center still pulled up and push them in. You push the center down to lock them. Then you're all set.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
Product Reviews
Loading reviews
There are no reviews for this item.
Customer Q&A
No questions have been asked about this item.
Customer service
877-844-3393
Monday - Friday 8:00am - 9:30pm ET Saturday - Sunday 8:00am - 4:30pm ET
Dodge is a registered trademark of FCA US LLC. 1A Auto is not affiliated with or sponsored by Dodge or FCA US LLC.See all trademarks.
Enter Vehicle Year Make Model
Specify your vehicle's year, make and model to guarantee fit.
Year
Make
Model
Options
Drivetrain
This part doesn’t fit a . Select from parts that fit.