Replaces
Part Details
Product Features
Complete Repair in One Purchase - Stop searching for parts individually and complete your repair with a customized kit or set from DIY Solutions.
High-Quality Parts from Trusted Brands - DIY Solutions' kits and sets are selected from the best automotive brands and include hard-to-find and even obsolete parts you may need for your vehicle.
Guaranteed Fit - DIY Solutions ensures its selected parts are quality-tested to guarantee fit and function.
Assemblies may include halogen or incandescent test bulbs that should be replaced before installation.
Item Condition:
New
Attention California Customers:
WARNING: This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
Created on:
Tools used
Hi, I’m Mike from 1A Auto. We’ve been selling auto parts for over 30 years!
Open the tailgate. Use a small flap of the screwdriver, and remove these two caps to get to the screws underneath. Just pop them out. Got a little tether to keep them in there. The same for both. These are seven millimeter head screws. I'm just using a socket and a driver handle. Remove these. Now, we need to push the tail light straight off of the quarter panel. There's a clip behind here. Just going to give it some force and going to push it. It came out pretty easily. There's a pin here that it's stuck on. Just push it out.
To replace the whole assembly, you can unplug it. Push in the lock, pull the connector off. Reconnect the harness. It'll click when it's locked in place, reinstall the assembly. I'll line up this pin, it's going to go right into that grommet there. That's it. Reinstall the self-tapping screws. Just tighten it in, and it'll get tight, just stop. Push these back into place. It'll snap right into place. The opposite side is the same exact procedure.
Thanks for watching. Visit us at 1AAuto.com for quality auto parts, fast and free shipping, and the best customer service in the industry.
