Replaces
Complete Repair in One Purchase - Stop searching for parts individually and complete your repair with a customized kit or set from DIY Solutions.
High-Quality Parts from Trusted Brands - DIY Solutions' kits and sets are selected from the best automotive brands and include hard-to-find and even obsolete parts you may need for your vehicle.
Guaranteed Fit - DIY Solutions ensures its selected parts are quality-tested to guarantee fit and function.
Assemblies may include halogen or incandescent test bulbs that should be replaced before installation.
Features and Benefits
Item Condition:
New
Attention California Customers:
WARNING: This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
Created on:
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Don from 1A Auto. I hope this how-to video helps you out, and the next time you need a part for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to service your taillight bulbs as well as replace the entire taillight assembly on this 2012 Chevy Traverse. We show you on the driver side, but the passenger side is the same procedure. The items you'll need for this include new taillights from 1AAuto.com, a 7mm socket and ratchet, and a flat blade screwdriver.
Start off by opening your tailgate. Right here there are two bolt covers. Pry them off with a flat blade screwdriver. Now you can see there are two 7mm bolts. We'll just fast-forward as Don removes those. Now pull the taillight directly out, and then push the tab on this harness and pull it through.
If you're just looking to service the bulb, you just want to twist the bulb out of the socket, pull the bolt out, push your new one in, and twist the socket back into place. The other bulb are pretty much the same. Twist it out, pull the bulb right out, push the new one in, and twist it back into place.
On the left is the old taillight; on the right is the new one from 1A Auto. They'll mount exactly the same.
Take your new taillight, plug in the harness, then line up this stud with this hole, and push the taillight back into place. You do have to apply a decent amount of pressure to get it to go in. Once you get it in, replace those two 7mm bolts and tighten them up. Then replace those two covers. Now test them out. Make sure they work, and you're all set.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
