Replaces
Replaces 2011-16 Ford Front Driver & Passenger Side 2 Piece Wheel Bearing & Hub Assembly Set Timken TKSHS00807
$1,019.95
Replaces 2011-16 Ford Driver & Passenger Side 4 Piece Mirror Kit Trail Ridge TR10152
$724.95
Replaces 2011-16 Ford Driver & Passenger Side 4 Piece Mirror Kit Trail Ridge TR10153
$714.95
Replaces 2011-16 Ford Driver & Passenger Side 4 Piece Mirror Kit Trail Ridge TR10151
$694.95
Replaces 2009-16 Ford Driver & Passenger Side 4 Piece Mirror Kit Trail Ridge TR10186
$674.95
Replaces 2014-16 Ford Fuel Tank TRQ FTA07504
$659.95
Replaces 2009-16 Ford Driver & Passenger Side 4 Piece Mirror Kit Trail Ridge TR10187
$654.95
Replaces 2009-16 Ford Driver & Passenger Side 4 Piece Mirror Kit Trail Ridge TR10154
$649.95
Replaces 2014-16 Ford Fuel Tank TRQ FTA07505
$575.95
Complete Repair in One Purchase - Stop searching for parts individually and complete your repair with a customized kit or set from DIY Solutions.
High-Quality Parts from Trusted Brands - DIY Solutions' kits and sets are selected from the best automotive brands and include hard-to-find and even obsolete parts you may need for your vehicle.
Guaranteed Fit - DIY Solutions ensures its selected parts are quality-tested to guarantee fit and function.
Assemblies may include halogen or incandescent test bulbs that should be replaced before installation.
Item Condition:
New
Attention California Customers:
WARNING: This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
Created on:
Tools used
Hi, I'm Mike from 1A Auto. We've been selling auto parts for over 30 years. We're dedicated to delivering quality auto parts, expert customer service, fast and free shipping, all backed by our 100% satisfaction guarantee. Visit us at 1AAuto.com, your trusted source for quality auto parts.
In this video, we're going to be working with our 2013 Ford F250 Super Duty. We're going to show you how to remove and replace your vehicle's fog lights in the bumper. If you like this video, please click subscribe. We have a ton more information on this and many other vehicles, and if you need this part for your truck follow the link down in the description over to 1AAuto.com. Here are the items you'll need for this repair.
In order to remove the fog light assembly we'll need to remove this bracket here. There are two 13 millimeter bolts on the inside corner of the bumper here and two 13 millimeters here facing forward toward the back side of the bumper. We'll remove all four of those with the 13 millimeter socket and ratchet. Once the bolts are out, remove the bracket from behind the fog light.
Remove the three 8 millimeter bolts securing the fog light bracket as well as the fog light and bezel to the bumper. We'll do this using an eight millimeter socket and ratchet. Before removing the last bolt, remember to slide off the connector from your fog light bulb. Once all the bolts are out, maneuver your fog light bracket and bezel out of the truck.
Remove the four 13 millimeter nuts securing the fog light bezel onto the fog light bracket. Once the bolts are out, remove the bezel from the housing.
Here we have our old fog light and bracket assembly that we removed from our truck and our new part from 1AAuto.com. As you can see, these parts are exactly the same. We have the same three bolt mounting locations, there's the one on the back there. The same four holes for our fog light bezel to mount onto our new bracket.
We have our new light, which comes with a new bulb and has the same adjuster screw on the back. This one actually gives you the option of using either an eight millimeter or a Phillips, which makes it a little more convenient. You can see that the old lens is starting to get dirty and beat up from road debris and things hitting it and our new one is nice and clear, so not only is this going to make our truck look a lot nicer aesthetically but it's also going to brighten up these fog lights and get our truck a lot more visibility, make it safer, fix you up right.
Install the fog light bezel back onto the bracket assembly. Flip it over, reinstall and tighten the four 13 millimeter nuts.
Reinstall the fog light assembly. Make sure all your bolts and brackets line up. Reinstall the three eight millimeter bolts. Reconnect the electrical connector and the harness retainer pin. Reinstall the stiffener bracket and all four 13 millimeter bolts. Now it's easiest, you can see where the old bolts lined up on the inside edge of the bumper there so we'll tighten those down first and line them up to their old marks. That will suck this side into place so we don't have to look awkwardly or get in a weird spot to line those up.
Thanks for watching. Visit us at 1AAuto.com for quality auto parts, fast and free shipping, and the best customer service in the industry.
