Replaces

2018 Ford Escape Rear Driver & Passenger Side Upper & Lower 6 Piece Control Arm Set TRQ PSA35595

$ 119.95

$172.95

31% OFF

$172.95

31% OFF

FREE SAME DAY SHIPPING

Read 1 REVIEWS

PSA35595

In Stock

This part doesn’t fit a . Select from parts that fit.

Show parts that fit

Orders must be placed by 2pm ET

1A Auto Lifetime Warranty

Description

Vehicle Fit

Warranty & Shipping

Part Details

Kit Includes:
  (2) Rear Lateral Links
  (2) Rear Upper Control Arms
  (2) Rear Lower Forward Control Arms
Quantity: 6 Piece

Specification

Side Location

Driver & Passenger Side

Location

Rear
Upper & Lower

Our control arms are designed to be direct replacements for the original factory parts. They are 100% brand new and require no modifications for installation. No special tools are required because all of the bushings come pre-installed.

Our steering and suspension components are pre-greased and sealed for long life and do not require the extra maintenance typically required by greaseable versions.

Item Condition: New

Attention California Customers:

proposition 65 icon WARNING: This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.

Product Reviews

Loading reviews

5.00/ 5.0

Rear control arms on 2013 Ford Escape

[{"url": "https://wac.edgecastcdn.net/001A39/prod/media/pNISJll75W64CYGsite/60d1cf0d186a3d274d49c618512483c8_1712159399145_0.jpeg", "caption": "Lower control arm"}, {"url": "https://wac.edgecastcdn.net/001A39/prod/media/pNISJll75W64CYGsite/03f0458871bbb2949d1419af24bc3058_1712159399145_1.jpeg", "caption": "Tools used"}, {"url": "https://wac.edgecastcdn.net/001A39/prod/media/pNISJll75W64CYGsite/511b59c0789d4b4f4f23197d58a4454d_1712159399145_2.jpeg", "caption": "Tools used"}, {"url": "https://wac.edgecastcdn.net/001A39/prod/media/pNISJll75W64CYGsite/2284384178956b7c89b2dc3e409a7654_1712159399145_3.jpeg", "caption": "Tools used"}, {"url": "https://wac.edgecastcdn.net/001A39/prod/media/pNISJll75W64CYGsite/a4ed2ba2a0e4fec416dff915c882cdff_1712159399145_4.jpeg", "caption": "Tools used"}]

Jerry

Put wheel up on two floor stands and car jack for safety, blocked other wheels and applied emergency brake. Cleaned threads of bolts with wire brush and sprayed with WD-40. Top bolt was a little tricky as it was very close to gas tank. Had to figure out how to get bolt out as ratchet and 60mm Torx was too long. Used a wrench on the shaft of the 60mm Torx. Started with top control arm, then the lower and tighten bolts. Adjusted top control arm using a camber leveling device to get close to setting. Taking to a garage to complete the alignment.

Customer Q&A

No questions have been asked about this item.