Assemblies may include halogen or incandescent test bulbs that should be replaced before installation.
Attention California Customers:
WARNING: This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii and Alaska.
Shipping is not available to a P.O. Box, APO/FPO/DPO addresses, US Territories, or Canada for this item.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii.
Final shipping costs are available at checkout.
How to Replace Tail Light Housing 2015-16 Volkswagen Jetta
Created on:
Tools used
No Tools Needed
1. Removing the Tail Light Housing
Pop off the carpet trim behind the light
Unscrew the bolt from the tail light
Disconnect the wiring harness from the tail light
2. Installing the Tail Light Housing
Connect the wiring harness
Press the housing into the vehicle
Tighten the plastic spring-loaded screw
Press on the carpet trim
Hi, I’m Mike from 1A Auto. We’ve been selling auto parts for over 30 years!
To access the rear bolt of the tail light, we're going to pop off this piece of carpet just with your hand, and access this white plastic bolt and just unscrew it. Put that aside. For the harness on the back of the tail light, you want to press in on the tab on the top and the bottom. Remove this. You can see that it's one here and one here and you want to push in on both sides at once to pull this out of the housing.
To put the tail light back in, you're going to grab your harness, put it back into its socket until it clips in. Rest the tail light fully into its housing. You're going to take your plastic spring loaded bolt. Slide it in and screw it back in. The carpet panel that goes back into place after you screw in your bolt is actually labeled the side of the car and the direction. You're going to take the panel, hook it back in. You're all set.
Thanks for watching. Visit us at 1AAuto.com for quality auto parts, fast and free shipping, and the best customer service in the industry.
441-19G2L-AS
In Stock
Product Reviews
Loading reviews
Customer Q&A
No questions have been asked about this item.
Customer service
877-844-3393
Monday - Friday 8:00am - 9:30pm ET Saturday - Sunday 8:00am - 4:30pm ET
Select Your Vehicle
Specify your vehicle's year, make and model to guarantee fit.