This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
Returns: Parts with electrical components cannot be returned once installed.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
How to Replace Spark Plugs 2000-14 Chevy Suburban 1500
Created on:
Tools used
Socket Extensions
Torque Wrench
5/8 Inch Spark Plug Socket
Ratchet
1. Removing the Spark Plug
Make sure the engine is cold
Grab and work the boot off of the spark plug
Clean off any dirt on the end of the plug
Remove the spark plug with a 5/8 spark plug socket
2. Installing the Spark Plug
Insert the spark plug into the spark plug socket
Tighten the spark plug without cross-threading it
Torque the spark plug to 11 foot-pounds
Press on the spark plug boot
These are where your spark plugs are on this 2009 Chevy Suburban. It's the rearmost one of the driver's side. We have four in each side. One, two, three, four. We go over to the passenger's side. This one is a little bit trickier to get to. It's in the way, way back. We've got back there, one here, one here, and one here. It'll be just enough room to get it. We're going to show you how to replace one on the driver's side front. This procedure is going to be the same for all of them. It just might take a little more maneuvering to get to the other side.
I'm going to give this a little turn, and then you don't want to pull on the wire. All you've got to do is work it off of the electrode and of the spark plug. It's usually on there pretty tight. I should also mention that you should do this when the engine is cold because we're right next to the exhaust manifold. Just put this to the side. You should do these one at a time.
Spark plug is down here in the head. I'm just going to take some compressed air. Just blow around the spark plug. If you don't have that, it's okay. Just be careful. Maybe take a brush. You just don't want anything falling down into the cylinder when you open up the spark plug hold. These spark plugs are going to take a five-eighths socket. You want to get a spark plug socket. This is a regular five-eighths socket. If you put a spark plug in here, it's real, real loose, and you can turn it while you're trying to install it. The spark plug is going to fall out.
A spark plug specific socket has a rubber insert to grab on to the foursome part of the spark plug so when you put it in here, it seats. You can go to install it. It's not going to fall out and the same when you're using it to remove old spark plugs. You can lift them out of the engine and they won't fall down. We're going to use a three-eighths drive and my five-eighths spark plug socket. It should be on there.
Take my ratchet. You're going to remove it. These are only torqued to eleven foot-pounds, so it shouldn't take much effort to get them out. Once it starts to get loose, you can remove the ratchet. We just use our fingers to spin it out. As you remove it, the spark plug socket is going to hold it in place so if you need to move it around, you're not going to drop it.
So you can see this is our old spark plug and this is our new one from 1AAuto.com. Their threads are the same length. A single electrode. These are going to work great and give you nice performance on your vehicle.
Take our new spark plug and put it into our spark plug socket. Carefully place it into a spark plug opening. Sometimes if you go backwards, it helps you find the threads and then you can spin it forward to go in. It should go in very, very easily. If it feels like it's cross-threading, you should stop and make sure that it's going in nice and straight. Okay. Now that you've got it hand-tight, we're going to torque it to eleven foot-pounds.
The spark plug torque can reinstall our spark plug boot. Just push it on as hard as you can and just check that it's seated.
Thanks for watching. Visit us at 1AAuto.com for quality auto parts, fast and free shipping, and the best customer service in the industry.
NGETK00033
In Stock
Product Reviews
Loading reviews
4.93/ 5.014
14 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
13
1
0
0
0
Iridium sparkplugs.
T
January 9, 2018
After using NGK iridium plugs in my motorcycles and atv's the overall performance was appreciable. The complete burning of the gas made it cleaner and lasted much longer than conventional plugs with no fouling. So I found them for my truck and now it runs like a new one with plenty of people.
NGK plugs
K
January 26, 2018
Fast shipping, great packaging and work fine in my 5.3 Chevy.
Also found easy way to remove plug wires using curved tractor Hose pliers.
the best store on the internet.
Alan
March 25, 2018
TThe customer service is best can't beat it...there helpful knowledge able staff gets you going in no time.
David-
May 25, 2018
Spark plugs were awesome my truck runs very very very well thank you
Vehicles Fuel Economy and overall performance improved
Tina
September 9, 2018
The spark plugs in my truck had not been replaced in years. So when it was time to replace them I relied on 1A Auto as my auto parts supplier to get my parts from.
They arrived within s few days and fit without issue. The truck ran better than ever before and my MPG greatly improved
Spark plugs
Douglas
September 10, 2018
I did order the Spark plugs for my vehicle But have not installed them yet
Im still planning to use them
Multiple misfires
Tim
April 27, 2020
My check engine light was on and my engine had a rough idle. Could feel it missing while driving. Ordered new plug wire set and new plugs from 1A auto and this fixed my problem. Check engine light went out shortly thereafter. Engine runs smooth now and idles fine.
Spark Plugs
Bradley
February 23, 2021
Plugs arrived neatly packed clean great service thanks 1A Auto
Spark plug set
Dylan
April 19, 2021
I was surprised on the price and came pretty quick would recommend a1 to my friends
2005 Chevy Silverado
Pedro
May 3, 2021
These replaced my old NGK's, and worked great.
Thank you team!
JOHN
November 16, 2021
Thanks for Quality parts I will recommend 1a auto to everyone I will for now on by my parts from them thank you keep up the good work
Matthew
December 5, 2022
Great price for NGK
NGK SPARK PLUGS
Tim
August 28, 2023
Quality Spark Plugs from a Quality Source
You always give the best price
It Fits
Ausage
November 2, 2023
I was Impressed! Good products!
Customer Q&A
Are they made especially for the 2007 model?June 16, 2017
Cassandra N
10
No a different vehicle. I placed an order for my mother's truck
November 21, 2017
Alan W
Are these spark plugs pre gapped?August 1, 2020
Riki T
10
Yes, they are, always double check them
prior to instal.
August 1, 2020
Carmen A
10
Thank you for your inquiry. These will come pre-gapped and ready to install, however, it is worth double checking to be sure nothing changed in transit. Please let us know if you have any further questions.
August 1, 2020
A C
What am I suppose to gap them at I have heard 0.60 and 0.40 my vehicle is a 2001 Chevy silverado with the 4.8?November 30, 2020
Javier C
10
These come pregapped to .039" (1.0mm) and due to the platinum tip they cannot be gapped further.
November 30, 2020
T I
Customer service
877-844-3393
Monday - Friday 8:00am - 9:30pm ET Saturday - Sunday 8:00am - 4:30pm ET
Chevrolet is a registered trademark of General Motors Company. 1A Auto is not affiliated with or sponsored by Chevrolet or General Motors Company.See all trademarks.
Enter Vehicle Year Make Model
Specify your vehicle's year, make and model to guarantee fit.
Year
Make
Model
Options
Drivetrain
This part doesn’t fit a . Select from parts that fit.