Replaces
Part Details
NOTE: It is necessary to reuse your original hardware, as new hardware is not included with this item.
Complete Repair in One Purchase - Stop searching for parts individually and complete your repair with a customized kit or set from DIY Solutions.
High-Quality Parts from Trusted Brands - DIY Solutions' kits and sets are selected from the best automotive brands and include hard-to-find and even obsolete parts you may need for your vehicle.
Guaranteed Fit - DIY Solutions ensures its selected parts are quality-tested to guarantee fit and function.
Item Condition:
New
Attention California Customers:
WARNING: This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii and Alaska.
Shipping is not available to a P.O. Box, APO/FPO/DPO addresses, US Territories, or Canada for this item.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii.
Final shipping costs are available at checkout.
Created on:
Tools used
This video is brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
In this video, we're going to show you how to remove and put back on the grille on this 2004 Chevy Trailblazer. There is nothing wrong with the grille on this vehicle, so we just took it off and put it back on for you.
The only tool you'll need is a flat blade screwdriver.
Grab the clips from behind, and pop them out. It's better if you do it quickly.
Then, what you want to do is there's one in the middle that I just popped and then there are two down the bottom. I'm just putting my screwdriver down into the grille, popping them out. Then you want to grab underneath. Be careful your grille doesn't go flying. Then the grille comes off.
The backside, you can see two at each end of a headlight. There are four up top that you can get to easily, two down bottom. There's one in the middle with the last couple located at the top. Make sure those go in.
We hope this helps you out. This video is brought to you by www.1AAuto.com your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free 888-844-3393. We're the company that's here for you on the Internet and in person.
Tools used
Hi, I’m Mike from 1A Auto. We’ve been selling auto parts for over 30 years!
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the internet.
Hi, I'm Mike Green. I'm one of the owners of 1A Auto. I want to help you save time and money preparing and maintaining your vehicle. I'm going to use my 20-plus years experience restoring and repairing cars and trucks like this to show you the correct way to install parts from 1AAuto.com. The right parts installed correctly—that's going to save you time and money. Thank you, and enjoy the video.
In this video we'll be showing you headlight replacement on this 2004 Chevy Trailblazer, same as a 2002 to 2005, and similar to the '06 to '09. If you're just looking to replace bulbs, the driver side you should be able to reach in behind and twist out the bulbs easily enough. The passenger side you will need to remove the headlight assembly, unless you have very small, flexible hands. You do need to remove the grille to take the headlights off, but that's not that difficult, the grille does just snap on and off.
Probably best to use a screwdriver. You can see right here, especially if you look down like this, there's little clips. Just grab them behind and pop them out. Another one here. It's better if you kind of do it a little quick like that. And then what you want to do is, there's one in the middle that I think I just popped, and there's two down here. I'll just put my screwdriver down into the grille and pop that one off. There's another one here, down here, pop that one out. Then, you just want to grab underneath. Same thing over here, grab underneath. Just be careful that your grille doesn't go flying. Okay, the grille comes off.
On the backside, you can see two into the headlight, then four up top that you can get to easy. Two down at the bottom. There's one here in the middle. Now on the light, there is a tab here. You can stick your screwdriver up under there and pry up on it. And the same thing right back in here, the tab is right here.
Okay, so I'm going to take a screwdriver. Use a screwdriver on this side. Pry up. I want you to pry them up. You might have to shake them around a little bit. The lights come out. There is a plug right down here, use your screwdriver again if you kind of pry up under the tab of the plug. There is a clip in here as well. Okay, just push on this tab here and pull it off. And one more here. Again, hold the tab right here and pull off. And your light's out.
Here’s a new headlight from 1A Auto. Even though this truck's in pretty good shape, it doesn't have that many miles. The old light's already all stone-chipped and scratched. The new light is much clearer and brighter. So we want to remove these from the back here, just has a little shipping stickers, so nothing gets inside.
Okay, before we go to put the light in, it has little shipping keepers, just to make sure that things don't wiggle around. Basically just pull this rod out from the back. Same thing over here. It'll pop right out. Whether you have this new style or the old ones, they just, the headlights, to change your headlight bulbs, you just twist the bulb out and then you unplug it. And that's how you remove and replace the headlight. The bulb itself, twist it back in. We're going to put our dust covers on.
Okay, now reconnect the harnesses. Twist that with the harness connected. Push the headlight back in. Push the tabs down slowly. Grille has a couple locating tabs up top. Make sure those go in.
We hope this helps you out. Brought to you by www.1aauto.com. Your source for quality replacement parts and the best service on the internet. Please feel free to call us toll free, 888-844-3393. We're the company that's here for you in the internet, and in person.
Thanks for watching. Visit us at 1AAuto.com for quality auto parts, fast and free shipping, and the best customer service in the industry.
