Replaces
Part Details
Item Condition:
New
Attention California Customers:
WARNING: This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
Created on:
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Mike Green. I'm one of the owners of 1A Auto. I want to help you save time and money repairing or maintaining your vehicle. I'm going to use my 20-plus years experience restoring and repairing cars and trucks like this to show you the correct way to install parts from 1AAuto.com. The right parts installed correctly: that's going to save you time and money. Thank you and enjoy the video.
In this video, we're going to show you how to remove and replace the rear inside door handle on this Trailblazer 2004, same as any Trailblazer, Envoy, Ascender, Bravada, Rainier, and Saab 97X. Tools you'll need are a small flat blade screwdriver, and a 7mm and 10mm socket with ratchet and extension.
Start by using a small screwdriver, and you want to pry up this little trap door, here. Pull it out. There's two 7mm bolts there, and then around your door handle, you can see the little slots. You want to take your screwdriver, push in there, and pull out. So push, and pull out on this bezel. There's another one right up here, another one here, and the last one up here. Then that comes right off.
Now, your power window switch, just work your screwdriver underneath. It pops up and out, and then there's a tab right here. You can just put your screwdriver in, push and pry it out. Disconnect that. Now I'll remove these two 7mm screws. We'll just fast forward, just taking those two 7mm bolts out.
Once you have all that out, you can just work your hands underneath. It's probably easiest if you start here in the front. You can just pull the panel. It's a brisk pull, and it comes off. You see it has all the pins just going to little holes.
The inside door handle has a 10mm bolt. Use a socket ratchet and extension. The handle slides forward and out. Pull the handle out a little bit. You'll see some clips back here. Pull the clip off and then pull the rod up. Then there's another one right underneath. Pull the clip off again. Pull the rod up and your handle is off.
To install your door handle, you've got two rods here. One is the lock. You can feel that it just has a detent in it and the other one just pulls. That's your door handle. The lock goes on the bottom. We just have to put in place, push it down in, and lock the clip on the door handle opener. Make sure you flip this clip around. Again, push it into place. Maybe use our screwdriver just to help lock that clip into place. Slide those in. It slides back. Insert the 10mm bolt. We'll just speed up tightening up that bolt. You want it nice and firm.
To put your door panel back on, make sure your harness gets into this little cavity. Pull it through. We should be able to pretty much just put the panel in place. Kind of look back in here to see the little green pin, go where it's supposed to go. Have a look over here. Pretty much once you have those two pins, you're all good.
Connect our switch. Push it down. This has a little line-up pin, goes into a hole in the handle. Make sure you push on all four corners.
Here are the two 7mm bolts. We'll fast forward as we put those bolts in and tighten them up. You want them nice and snug. They don't have to be overly tight, though.
Now push this back into place. One good thing is just to make sure your door is unlocked, and you're all set.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Mike Green. I'm one of the owners of 1A Auto. I want to help you save time and money repairing or maintaining your vehicle. I'm going to use my 20-plus years experience restoring and repairing cars and trucks like this to show you the correct way to install parts from 1AAuto.com. The right parts installed correctly: that's going to save you time and money. Thank you and enjoy the video.
In this video, we're going to show you how to replace an inside door handle on this 2004 Chevy Trailblazer. The tools you'll need are a 10mm socket with a ratchet and extension, and medium and small flat blade screwdrivers.
Start with a regular screwdriver. Put it up under, give a quick little pry, and do same thing here. Pry that up. You can see it has two clips on the front and back. Then, you want to turn it over here and unplug all these harnesses. They basically just have little thumb tabs. Pull them up, and you can skip that one, and this one pulls out fairly easy. Use your screwdriver, pry that up a little bit, and move that off. Then, over here, use a screwdriver on this tab. Pry it up a little bit and it will come right out.
Now around your door handle here, you're going to see some little tabs where you can insert a small screwdriver. Push down with your screwdriver and then pull out with your hand. Work your hand underneath another tab right back here. Push down, pull out, and then there's a couple up top. Those ones you push up, one more right here. This whole thing comes out. If you have the memory seat and everything, you can now pull this whole harness right up and out. There are two 10mm bolts: one there and then one way down in there. Use a 10mm socket with an extension and ratchet. This one's really easy to get to. Pull it up and out. This one, I'm going to start it and unscrew it as much as I can.
I just felt it fall, which is okay. Once you have those out, then you can start up here with your hand. Work it underneath this triangle, pull out, then work your hand under the door panel and it will get harder and harder to slide under. Then you pull, keep working your hand under, and pull, work your hand under, pull. Actually here's my bolt from the armrest. We work our hand under, pull out, and your door panel comes off.
Your inside door handle, there's a 10mm bolt right here. Remove that. Move it forward and it comes out. Now, in behind here there are little clips. You pull the clip off the rod, and then push the rod up. Another one down here, pull the clip off, push the rod up.
Reinstallation is just a reverse. Push the rod over, clip on, pull the rod over, push it down, and clip it on. Push the handle in, slide it back, and replace the 10mm bolt.
I'm going to fast-forward here through putting the door panel back on, just in the interest of keeping the video a little bit on the short side. Once you get it off it's pretty easy to get back on. If you do want to see this in real speed, or regular speed, check out our other videos for the Trailblazer front door panel remove and replace.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
