Replaces
Replaces Chevrolet Blazer S10 Pickup Driver & Passenger Side 2 Piece Headlight Set DIY Solutions LHT03171
$73.95
Replaces Chevrolet Blazer S10 Pickup Driver Side Headlight Assembly Eagle Eyes GM163-B001L
$38.95
Replaces Chevrolet Blazer S10 Pickup Passenger Side Headlight Assembly Eagle Eyes GM163-B001R
$38.95
Replaces Chevrolet Blazer S10 Pickup Driver & Passenger Side 2 Piece Parking Light Set DIY Solutions LHT08921
$33.95
Replaces Chevrolet Blazer S10 Pickup Driver Side Parking Light Eagle Eyes GM165-U000L
$23.95
Replaces Chevrolet Blazer S10 Pickup Passenger Side Parking Light Eagle Eyes GM165-U000R
$23.95
Part Details
Complete Repair in One Purchase - Stop searching for parts individually and complete your repair with a customized kit or set from DIY Solutions.
High-Quality Parts from Trusted Brands - DIY Solutions' kits and sets are selected from the best automotive brands and include hard-to-find and even obsolete parts you may need for your vehicle.
Guaranteed Fit - DIY Solutions ensures its selected parts are quality-tested to guarantee fit and function.
Assemblies may include halogen or incandescent test bulbs that should be replaced before installation.
Features and Benefits
Item Condition:
New
Attention California Customers:
WARNING: This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii and Alaska.
Shipping is not available to a P.O. Box, APO/FPO/DPO addresses, US Territories, or Canada for this item.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii.
Final shipping costs are available at checkout.
Created on:
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Mike Green. I'm one of the owners of 1A Auto. I want to help you save time and money repairing or maintaining your vehicle. I'm going to use my 20-plus years experience restoring and repairing cars and trucks like this to show you the correct way to install parts from 1AAuto.com. The right parts installed correctly: that's going to save you time and money. Thank you and enjoy the video.
In this video, we'll be replacing the parking lights on a 2001 Chevy S10 pickup, basically the same as most '98 to '04 S10s. This one does not have fog lights, the parking lights are different for ones that have fog lights and do not have fog lights. It's pretty easy. No tools are necessary.
We start by removing the headlights, which is pretty simple. There are two tabs that pull up, that lock the headlight into place and then you rotate the light forward and pull it out and then just use thumb and unlock the headlight harnesses. Then the side marker light bulb twists out and your headlight is free. Now we're going to remove the parking light and it's locked in by a double tab here. You use your other hand to press out on the light a little bit while you pushing on the tabs with a screwdriver and it will come unlocked pretty quick. Then there is a third tab that holds it in, on this one it kind of came right out but on the side and I'll show it to you later, there's another tab that locks it in. Then, once the parking light is out, it's a twist tab, it's a thumb tab and then twist and your parking light is out.
Here with the light out you can see the mounting tabs better. There's two alignment tabs there and there's the big square clip. This is the one that can be a problem when you're removing the parking light and it's actually easy enough to reach in from the side and hit that with your finger and pull it and have it unlock. I'll just continue to show you where those tabs go.
Insert the bulb and twist. It can be a little bit of a pain and then twist and put it in. Then push it back into place. Change the angle, here, so you can see from the top. Make sure that goes in correctly. Then push the other side. Then I also grab the inside of the grill just to make sure everything's in.
Now there are tabs in the headlights that go down in those slots, I'm going to spray them with a little oil just to make things easier. Those are the tabs, they go into the slots when you're putting the headlight in. Now we're going to get ready, we're going to plug in the harness here and what I'm going to show you next after we plug in the harness is you want to make sure that harness doesn't get pinched in. There's actually on those tabs that I showed you, there's a little ledge built on and you wrap the harness up and around that ledge. I'll show you here. I'm grabbing the harness and I'm bringing it up on top of the tabs that are on the tabs, if you have one of these lights in your hand you'll see what I mean. Then you put the light in and it's kind of a little ballet of pushing the bottom down, making sure those tabs go into those slots and then getting the upper tabs back into the radiator support.
You can actually look down into the holes and see everything pretty clearly. You can get it. Then once you got that, you put the locking tabs back in, which unfortunately I didn't get a great shot of here, but lock the tabs back in and you are all set. That's it. A grille replacement takes probably about 30, 35 minutes and if you do your headlights and parking lights at the same time you can really freshen up the front end of you S10.
We hope this helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the internet.
Hi, I'm Mike Green. I'm one of the owners from 1A Auto. I want to help you save time and money repairing and maintaining your vehicle. I'm going to use my 20 plus years of experience restoring and repairing cars and trucks like these to show you the correct way to install parts from 1AAuto.com. The right parts installed correctly, that's going to save you time and money. Thank you and enjoy the video.
In this video, we'll be replacing the headlight in this 2001 Chevy S10 Pickup. Basically the same as any '98 to 2004 S10 pickup with the Style lights, very easy procedure, you don't even need any tools and we'll get right to it.
You're going to open up the hood and then there's two locking tabs that you see on the top of the screen there, I'm pulling up on them. Place those locking tabs there where they're safe and they don't fall in and you don't have to fish them out, like I did a couple of times. Then, you pull the headlight forward and it's out. Then, you can unplug your lights and service the bulbs, if you need to do that or if a rock jumped up and hit the light or whatever, you can replace your entire headlight, too.
Then, there's two slots that I'm going to spray some lubricant on just to make it easy to get everything together. Right there, that slot and that slot. Then, I'll show you the tabs. These tabs go into those slots, okay? The other thing is you don't want to pinch your wires. I'm going plug in the harnesses here and I'm going to show you how to make sure you don't pinch the wires. Those tabs I showed you a few seconds ago, they also have tabs that come forward. Once you have one of these lights in your hands, you'll understand what I mean. What you do is you take the harnesses and you put them up on top of the protruding tabs. That keeps them from getting in behind the other tabs and getting caught between the metal and the plastic of the headlight, okay?
Put your headlight back in there. This is a little ballet of pushing on the backside of the headlight, pushing in and down at the same time and then getting everything to line up. You can see down, there's a couple of holes that you can see down into to see how things are lined up. Once you get it, it goes in and then you put your locking tabs, which I didn't do a very good job videoing there, I apologize. You put your locking tabs back on and you're all set.
We hope this helps you out. This video was brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the internet. Call us toll-free, 888-844-3393. We're the company that's here for you on the internet and in person. Thank you very much.
