These lug nut caps are the one last detail that you need to bring the luster back to your wheels! They fit over the lug nuts and snap into place acting as a protectant. On most cars, the lug nut caps are usually missing or in bad shape from years of driving and mechanics abuse. Now you have the opportunity to replace the missing or damaged ones with this set of five!
Specifications:
Comes as a SET of 10
Gray Finish
Thread: M24-2.0
Hex Size: 19mm
Length: 32.5mm
Replaces dealer part numbers: 9593229, 9595118
Built to strict quality control standards
Covers exposed lug nuts like the originals
Why not replace your old, cracked, banged up, or missing lug nut caps with these new, ready to install replacements.
Installation Tip - DO NOT tighten with a wrench. Tighten the caps by placing a 19mm socket on the cap and use your hand only. Over tightening will strip the threads or crack the caps. If a shop works on your tires take the caps off before hand and put them on yourself after you get the car back. Most shops are concerned with speed of repair and will use an impact wrench.
Item Condition:New
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
How to Install 1A Auto GM Lug Nut Caps Keep Your Wheels Looking Good
Created on:
Tools used
19mm Socket
1. Hand-Threading the Caps
Always begin by threading each cap by hand. This will insure that they thread correctly.
2. Tightening the Caps
Once you are sure they are correctly threaded, grab your 19 mm socket and tighten up each cap. Remember, they are plastic, so don't over-tighten them or they may crack again and you'll end up back at step one.
Brought to you by 1AAuto.com your source for quality replacement parts and the best service on the internet.
Hi, I'm Mike Green, one of the owners of 1A Auto. I want to help you save time and money repairing and maintaining your vehicle. I'm going to use my 20+ years' experience restoring and repairing cars and trucks like this to show you the correct way to install parts from 1AAuto.com. The right parts installed correctly. That's going to save you time and money. Thank you and enjoy the video.
When you leave in the morning, you don't go out half dressed do you? Why in the world would you leave with your wheels half dressed? Broken or missing caps? Come on, we can do better than that. 1A Auto sells these and they're really easy to take care of. What happens to these poor guys is they tighten them up too much and they break them and then they end up falling off.
1A Auto sells them all new in, sets of five or sets of 20; you'll never have to let your car or your wheel go out half dressed again. Very easy.
What you want to do is put them on carefully. Put them on with your hand first and make sure they thread correctly. Then use your 19 mm socket I believe you should be able to see that 19 mm pretty well. Then, you just put them on by hand, then you get them, it takes about two or three turns and you feel, and then you tighten. Then, you stop there, not too tight and not too loose.
Personally, if I take my car to the tire shop, I actually take these off beforehand so that those guys can't get a hold of them and use their impact wrenches on them and break them again. That's it, and that's a nice dressed wheel.
Now to recap—no pun intended—go to 1AAuto.com and get some new caps. Put them on, and your wheels will be glad you did.
This video was brought to you by www.1AAuto.com. We hope we helped you out. We are your source for quality replacement parts and the best service on the Internet. Feel free to call us, Toll Free: 888-844-3393. We're here for you on the Internet and in person. Thank you very much.
1AWHK00025
In Stock
Product Reviews
Loading reviews
3.00/ 5.02
2 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
0
1
0
1
0
Worked perfect
Patrick
December 18, 2015
These fit just as planned. Had to replace half of these on the vehicle. Poor manufacturer design leads to them just falling off after a few years. Besides being decorative, these plastic lug nut covers also hold on the actual stock plastic wheel cover (hub cap). A bit pricey per individual piece, but they are becoming hard to come by and if they prevent losing the expensive goofy wheel cover they are worth it.
Wheel nut
T
December 19, 2017
Well i thought i had a good experience with my wheel nuts until i finally had time to put them on now i find out one of them in the box i open is bad crack on the top surely they could of easily seen this was a bad part before it was put in the box
Customer Q&A
Do you need special wheel nuts for these caps to screw onto? The underside of this cap is threaded so don't you need a special external thread wheel nut?December 18, 2015
Ron R
10
These plastic lug nuts serve a dual purpose- 1) they are decorative and 2) they hold on the stock wheel cover (hub cap). These are intended to be used with the stock wheel cover and stock metal lug nuts (that are threaded externally so that they may accept these plastic covers). Good luck.
December 18, 2015
Patrick M
10
Hello, These are designed to work with specific wheel caps.
December 28, 2015
Brian F
10
No you dont need any tool. The cap have slots on it to match spot on rim snaps right in place
June 21, 2020
Gary S
Customer service
877-844-3393
Monday - Friday 8:00am - 9:30pm ET Saturday - Sunday 8:00am - 4:30pm ET
Chevrolet is a registered trademark of General Motors Company. 1A Auto is not affiliated with or sponsored by Chevrolet or General Motors Company.See all trademarks.
Enter Vehicle Year Make Model
Specify your vehicle's year, make and model to guarantee fit.
Year
Make
Model
Options
Drivetrain
This part doesn’t fit a . Select from parts that fit.