Kit Includes: (1) Passenger Side Mirror (1) Driver Side Mirror
Cover Color: Black
Cover Finish: Textured
Housing Finish: Textured
Mounting Hole Quantity: 3
Quantity: 2 Piece
Fold Away Mechanism: Manual
Mounting Hardware Included: No
Mirror Color / Finish: Paint to Match
Material: Plastic
Aspherical Glass: No
Blind Spot Indicator: No
Heated: No
Integrated Puddle Light: No
Housing Color: Black
Housing Turn Signal Indicator: No
Mirror Turn Signal Indicator: No
Mirror Memory Type: Without Memory
Adjustment Type: Manual
Specification
Side Location
Driver & Passenger Side
Body Type
Coupe
TRQ side mirrors and mirror components are designed to match the function, fixture, and performance of the original version for easy installation. TRQ mirrors are DOT certified, comply with all federal safety standards, and are independently lab tested to ensure our products comply with all government regulations. All products are fit and road-tested in our Massachusetts R&D facility to ensure we deliver on our promise of Trusted Reliable Quality.
Product Features
Direct Bolt-on Replacement: No modifications for an easy install
DOT Certified: Built to the highest quality standards
Complies with federal safety standard FMVSS-111
Matching set for a renewed appearance
Exact fit - To obtain proper fit and function confirm your vehicle has the exact mirror options listed.
Paint To Match Note:
"Paint-to-match finish" refers to a smooth, paintable surface. This item is not painted. Paint offers better coverage and adhesion, but it is not necessary for installation.
Item Condition:New
Attention California Customers:
WARNING: This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
How to Replace Mirror 1995-2005 Pontiac Sunfire
How To Replace Side Rear View Mirror 1995-2005 Chevy Cavalier
Created on:
Tools used
Phillips Head Screwdriver
10mm Socket
Ratchet
1. Removing the Side Mirror
Remove the Phillips screw in the triangular panel at the top of the door panel.
Remove the foam insulation.
Remove the three 10mm nuts.
Pull the mirror out and off.
2. Replacing the Side Mirror
Line up the mirror and push it into place.
Replace the three 10mm nuts.
Replace the foam insulation.
Replace the triangular panel and the Phillips screw.
Brought to you by 1AAuto.com your source for quality replacement parts and the best service on the internet.
Hi, I'm Mike Green, I'm one of the owners of 1A Auto. I want to help you save time and money repairing and maintaining your vehicle. I'm going to use my 20 plus years experience restoring and repairing cars and trucks like this to show you the correct way to install parts from 1AAuto.com. The right parts installed correctly, that's going to save you time and money. Thank you and enjoy the video.
In this video we'll be showing you how to replace a manual mirror on this 1997 Pontiac Sunfire same as pretty much a '95 to '05 Sunfire or Cavalier with the manual mirrors and all the only tools you'll need are a Phillip's screwdriver and a 10mm wrench or socket and ratchet.
If you have one of these Cavaliers or Sunfire's with a manual mirror usually if they have manual windows the manual mirror we'll place that here if you give it a little run-ins, it's really a pretty easy task. Just a little Phillip's screwdriver right here for a Phillip's screw. Remove that, the plate comes off and then you can pull this little piece of foam rubber out and there's three 10mm bolts. You see right there, one, two and three. I think you have to be really careful of this, make sure you don't drop these bolts, and for these back two others, 10mm socket and ratchet will be your best bet.
There's the mirror off. Here's the original mirror, here's the mirror from 1A Auto. You can see everything's all the same. 1A Auto mirror comes with a gasket and everything and we'll go on there and fix your broken mirror. Now, obviously this one's fine so we're going to reinstall it and that's really just a reversal of procedure.
Push the mirror on. Get all three bolts on first and then when you tighten these up you want them firm but you don't want to tighten them too much because it is a plastic mirror and you don't want to break studs right out of the plastic. You put your foam on, the tab on the plastic piece that goes behind and then start your Phillip screw and then tighten it up. Then you're all set.
We hope this helps you out. Brought to you by www.1AAuto.com . Your source for quality replacement parts and the best service on the internet. Please feel free to call us toll free 888-844-3393. We're the company that's here for you on the internet and in person.
Tools used
Phillips Head Screwdriver
10mm Wrench
10mm Socket
Ratchet
1. Removing the Side Rear View Mirror
Remove the Phillips screw from the base mirror piece
Remove the base mirror piece
Remove the insulation behind the panel
Remove the three 10mm nuts on the base of the mirror
Pull the mirror out
Peel the insulation off if it does not remove with the assembly
2. Installing the New Side Rear View Mirror
Push the mirror into place
Insert and tighten the three 10mm nuts
Insert the insulation
Push in the base mirror piece
Insert and tighten the Phillips screw to the base mirror piece
Test the mirror in all four directions
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Don from 1A Auto. I hope this how-to video helps you out, and the next time you need a part for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to replace the driver side mirror on a 2000 Chevy Cavalier. It's a very similar operation for many years of the Cavalier, as well as for the passenger side. You'll need a new mirror assembly from 1A Auto as well as a 10mm socket and socket wrench, a 10mm open-ended wrench, and as a Phillips head screwdriver.
Locate the Phillips head screw that's in the cover by the handle. I'm removing that screw with the Phillips head screwdriver and pulling that panel off. Pull out the insulation that's in the little area there behind the panel. Locate the three 10mm nuts. Fast-forward as I remove two of those nuts with the socket and socket wrench. The third one closest to the front of the door is tough to get to with the socket wrench, so I'm using an open-ended wrench. Fast-forward as I take that out. Pull the mirror away from the door and out.
If the insulation doesn't come off with the mirror assembly, you'll need to peel it off the door itself. Here's a side-by-side comparison of the old part and the new part. They're identical.
With the new mirror, I'm just going to make sure that the handle goes through the hole there. Push it up and try to keep it from falling out for a second while you open the door and get in to start putting in those three 10mm nuts. Then fast-forward as I finish putting in those three nuts.
Reinstall the insulation or the little foam padding and the triangular piece that you took out from the inside of the door. Now reinstall the triangular cover panel with the Phillips head screw. Check to make sure that it's fully operational in all four directions.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
MRA09119
In Stock
Product Reviews
Loading reviews
5.00/ 5.02
2 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
2
0
0
0
0
Overall awesome!
Annemarie
July 24, 2017
I was super surprised by how quick these mirrors arrived. They were packaged very nicely and looked so nice and new I was afraid to install them Haha! But the installation was super easy and they look amazing :)! Thank you!
J
November 30, 2017
Great quality and fast shipping. Will be ordering more parts when need in the future
Customer Q&A
Do these come with the nuts and bolts?March 30, 2019
Nathaniel M
10
New hardware is not included with this item. You may be able to reuse your original hardware if it is in good condition.
March 30, 2019
Peter L
10
Yes
March 30, 2019
Annemarie J
Customer service
877-844-3393
Monday - Friday 8:00am - 9:30pm ET Saturday - Sunday 8:00am - 4:30pm ET
Chevrolet is a registered trademark of General Motors Company. 1A Auto is not affiliated with or sponsored by Chevrolet or General Motors Company.See all trademarks.
Enter Vehicle Year Make Model
Specify your vehicle's year, make and model to guarantee fit.
Year
Make
Model
Options
Drivetrain
This part doesn’t fit a . Select from parts that fit.