Kit Includes: (1) Passenger Side Mirror (1) Driver Side Mirror
Cover Color: Black
Cover Finish: Textured
Housing Finish: Textured
Mounting Hole Quantity: 3
Quantity: 2 Piece
Fold Away Mechanism: Manual
Mounting Hardware Included: No
Mirror Color / Finish: Paint to Match
Material: Plastic
Manual Remote Control: Yes
Aspherical Glass: No
Blind Spot Indicator: No
Heated: No
Integrated Puddle Light: No
Housing Color: Black
Housing Turn Signal Indicator: No
Mirror Turn Signal Indicator: No
Mirror Memory Type: Without Memory
Adjustment Type: Manual
Specification
Side Location
Driver & Passenger Side
Body Type
Sedan
TRQ side mirrors and mirror components are designed to match the function, fixture, and performance of the original version for easy installation. TRQ mirrors are DOT certified, comply with all federal safety standards, and are independently lab tested to ensure our products comply with all government regulations. All products are fit and road-tested in our Massachusetts R&D facility to ensure we deliver on our promise of Trusted Reliable Quality.
Product Features
Direct Bolt-on Replacement: No modifications for an easy install
DOT Certified: Built to the highest quality standards
Complies with federal safety standard FMVSS-111
Matching set for a renewed appearance
Exact fit - To obtain proper fit and function confirm your vehicle has the exact mirror options listed.
Paint To Match Note:
"Paint-to-match finish" refers to a smooth, paintable surface. This item is not painted. Paint offers better coverage and adhesion, but it is not necessary for installation.
Item Condition:New
Attention California Customers:
WARNING: This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
How To Replace Side Rear View Mirror 1995-2005 Chevy Cavalier
How To Replace Side Rear View Mirror 1995-2005 Chevy Cavalier
Created on:
Tools used
Socket Extensions
Phillips Head Screwdriver
10mm Wrench
10mm Socket
Ratchet
1. Removing the Side Mirror
Remove the Phillips screw from the triangle panel at the top of the door panel.
Remove the triangle panel.
Remove the insulation.
Remove the three 10mm nuts that secure the mirror. Use a wrench for the lower nut.
Pull the mirror free from the door.
2. Replacing the Mirror
Line up the mirror and push it into place.
Replace the three 10mm nuts. Use your fingers to start the lower one (careful not to drop it down into the door).
Replace the insulation.
Replace the triangle panel.
Reinsert the Phillips screw into the triangle panel.
Brought to you by 1AAuto.com, your source for quality auto replacement parts and the best service on the internet.
Hi, I'm Mike from 1A Auto. I hope this how to video helps you out. Next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to replace a mirror on this 2003 Cavalier, pretty much the same as any '97 to '05 Cavalier. This vehicle does have the manual mirrors so this procedure is only for manual mirrors. Tools you'll need are Philips screwdriver, a 10mm wrench as well as a 10mm socket with a ratchet and extension.
Okay. Philips screwdriver, there's a screw right here. Remove it. Okay. Then this kind of lifts up. It comes off. There's some insulation back in here. Pull that out. Okay, then you have three 10mm nuts to hold this on. Okay, I'm just going to use a 10mm wrench. A little difficult to get this one, get it first. Use a 10mm wrench, get it in there and just loosen up that nut. Just takes a little bit of time. Then when you get it loose, just carefully pull it out of there. You don't want to drop it down further into the door.
Okay these two are easy to get out with a 10mm socket with an extension and ratchet. Okay. Pull and push on the mirror. Bases usually get stuck on the door. Your mirror comes right off. As you can see, my original mirror is in good shape. I am going to remount it. Mirror is from 1A Auto. They come just like the original. They're going to bolt right into place. Just need to put it in. Get it in place and make sure the studs get through. I'm just going to take my nut, put it into the socket then put it on. Do the same thing for this one down here. Okay, then lastly this one here. Carefully, I'm kind of using two fingers to get it into place and get it started. Push in on the mirror. I'll get it as tight as I can with my finger. Tighten these two here that were easy to get to. Nice and firm but not over tight. Turns in here again. Tighten it up some with the finger. Then use the wrench. Just need to get in here.
Okay, once that's tightened up put our insulation right back in. Take our trim, put it back on. Screw through, kind of peek through the back and see if the screw is going into the hole. Tighten that up. We're all set.
We hope this helps you out. Brought to you by www.1AAuto.com, your source for quality auto replacement parts and the bets service on the internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the internet and in person.
Tools used
Phillips Head Screwdriver
10mm Wrench
10mm Socket
Ratchet
1. Removing the Side Rear View Mirror
Remove the Phillips screw from the base mirror piece
Remove the base mirror piece
Remove the insulation behind the panel
Remove the three 10mm nuts on the base of the mirror
Pull the mirror out
Peel the insulation off if it does not remove with the assembly
2. Installing the New Side Rear View Mirror
Push the mirror into place
Insert and tighten the three 10mm nuts
Insert the insulation
Push in the base mirror piece
Insert and tighten the Phillips screw to the base mirror piece
Test the mirror in all four directions
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Don from 1A Auto. I hope this how-to video helps you out, and the next time you need a part for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to replace the driver side mirror on a 2000 Chevy Cavalier. It's a very similar operation for many years of the Cavalier, as well as for the passenger side. You'll need a new mirror assembly from 1A Auto as well as a 10mm socket and socket wrench, a 10mm open-ended wrench, and as a Phillips head screwdriver.
Locate the Phillips head screw that's in the cover by the handle. I'm removing that screw with the Phillips head screwdriver and pulling that panel off. Pull out the insulation that's in the little area there behind the panel. Locate the three 10mm nuts. Fast-forward as I remove two of those nuts with the socket and socket wrench. The third one closest to the front of the door is tough to get to with the socket wrench, so I'm using an open-ended wrench. Fast-forward as I take that out. Pull the mirror away from the door and out.
If the insulation doesn't come off with the mirror assembly, you'll need to peel it off the door itself. Here's a side-by-side comparison of the old part and the new part. They're identical.
With the new mirror, I'm just going to make sure that the handle goes through the hole there. Push it up and try to keep it from falling out for a second while you open the door and get in to start putting in those three 10mm nuts. Then fast-forward as I finish putting in those three nuts.
Reinstall the insulation or the little foam padding and the triangular piece that you took out from the inside of the door. Now reinstall the triangular cover panel with the Phillips head screw. Check to make sure that it's fully operational in all four directions.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
MRA09144
In Stock
Product Reviews
Loading reviews
5.00/ 5.03
3 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
3
0
0
0
0
J
May 6, 2019
I ordered a pair of mirrors,they were guaranteed to fit,they fit perfectly.I am very happy with them.I also enjoyed the installation video. I would recommend your company to anyone.Write
Lesson Learned
Steve
November 29, 2021
Should have ordered these from the start. Ordered from different place, big mistake! The mirrors fit but not correctly. Ordered from 1AAuto,perfect fit. Lesson learned.
my son is restoring a 1996 sunfire and this was the last piece of the project.
Osvaldo
January 7, 2022
perfect fit, awesome prices
Customer Q&A
Part #: 1AMRP00144 - 2003 Chevy Cavalier 4 Door Sedan Manual Mirror Pair - The picture shows both mirrors having a joy stick adjuster inside the car, but the product description indicates that only the driver side mirror has "remote" adjustment. WhicMay 26, 2018
Mike G
10
The driver side uses a joystick, but the passenger side will be push-on-glass style. If you want to check out the listing for 1AMRE00679 you will get a better representation of what the passenger side mirror will look like!
May 27, 2018
T I
Customer service
877-844-3393
Monday - Friday 8:00am - 9:30pm ET Saturday - Sunday 8:00am - 4:30pm ET
Chevrolet is a registered trademark of General Motors Company. 1A Auto is not affiliated with or sponsored by Chevrolet or General Motors Company.See all trademarks.
Enter Vehicle Year Make Model
Specify your vehicle's year, make and model to guarantee fit.
Year
Make
Model
Options
Drivetrain
This part doesn’t fit a . Select from parts that fit.