TRQ side mirrors and mirror components are designed to match the function, fixture, and performance of the original version for easy installation. TRQ mirrors are DOT certified, comply with all federal safety standards, and are independently lab tested to ensure our products comply with all government regulations. All products are fit and road-tested in our Massachusetts R&D facility to ensure we deliver on our promise of Trusted Reliable Quality.
Product Features
Direct Bolt-on Replacement: No modifications or special tools required
Complete Assembly: includes same mirror glass, housing, bracket and technology as the original unit
DOT Certified: Built to the highest quality standards
FMVSS-111 Compliant: Validated to be a dealership alternative
Exact fit - To obtain proper fit and function confirm your vehicle has the exact mirror options listed.
Paint To Match Note:
"Paint-to-match finish" refers to a smooth, paintable surface. This item is not painted. Paint offers better coverage and adhesion, but it is not necessary for installation.
Item Condition:New
Attention California Customers:
WARNING: This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
How to Replace Mirror 1995-2005 Pontiac Sunfire
Created on:
Tools used
Phillips Head Screwdriver
10mm Socket
Ratchet
1. Removing the Side Mirror
Remove the Phillips screw in the triangular panel at the top of the door panel.
Remove the foam insulation.
Remove the three 10mm nuts.
Pull the mirror out and off.
2. Replacing the Side Mirror
Line up the mirror and push it into place.
Replace the three 10mm nuts.
Replace the foam insulation.
Replace the triangular panel and the Phillips screw.
Brought to you by 1AAuto.com your source for quality replacement parts and the best service on the internet.
Hi, I'm Mike Green, I'm one of the owners of 1A Auto. I want to help you save time and money repairing and maintaining your vehicle. I'm going to use my 20 plus years experience restoring and repairing cars and trucks like this to show you the correct way to install parts from 1AAuto.com. The right parts installed correctly, that's going to save you time and money. Thank you and enjoy the video.
In this video we'll be showing you how to replace a manual mirror on this 1997 Pontiac Sunfire same as pretty much a '95 to '05 Sunfire or Cavalier with the manual mirrors and all the only tools you'll need are a Phillip's screwdriver and a 10mm wrench or socket and ratchet.
If you have one of these Cavaliers or Sunfire's with a manual mirror usually if they have manual windows the manual mirror we'll place that here if you give it a little run-ins, it's really a pretty easy task. Just a little Phillip's screwdriver right here for a Phillip's screw. Remove that, the plate comes off and then you can pull this little piece of foam rubber out and there's three 10mm bolts. You see right there, one, two and three. I think you have to be really careful of this, make sure you don't drop these bolts, and for these back two others, 10mm socket and ratchet will be your best bet.
There's the mirror off. Here's the original mirror, here's the mirror from 1A Auto. You can see everything's all the same. 1A Auto mirror comes with a gasket and everything and we'll go on there and fix your broken mirror. Now, obviously this one's fine so we're going to reinstall it and that's really just a reversal of procedure.
Push the mirror on. Get all three bolts on first and then when you tighten these up you want them firm but you don't want to tighten them too much because it is a plastic mirror and you don't want to break studs right out of the plastic. You put your foam on, the tab on the plastic piece that goes behind and then start your Phillip screw and then tighten it up. Then you're all set.
We hope this helps you out. Brought to you by www.1AAuto.com . Your source for quality replacement parts and the best service on the internet. Please feel free to call us toll free 888-844-3393. We're the company that's here for you on the internet and in person.
MRA05172
In Stock
Product Reviews
Loading reviews
4.33/ 5.03
3 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
2
0
1
0
0
I
July 6, 2017
said it would fit a 2001 but it didn't. I have it on my car but it does not fit in the place it is suppose to.
Great Experience
Thomas
July 10, 2017
Part was delivered on time as promise and met all expectations.
The Free Shipping Sealed the deal. It brought the price down below all other competitors. Some showed a lower price ( a couple of $$ at most) but their shipping charges put them out of the game.. Great price Great Service!! ToM D
Susan
March 15, 2018
Superior product. Met all standards and easy to install.
Customer Q&A
No questions have been asked about this item.
Customer service
877-844-3393
Monday - Friday 8:00am - 9:30pm ET Saturday - Sunday 8:00am - 4:30pm ET
Chevrolet is a registered trademark of General Motors Company. 1A Auto is not affiliated with or sponsored by Chevrolet or General Motors Company.See all trademarks.
Enter Vehicle Year Make Model
Specify your vehicle's year, make and model to guarantee fit.
Year
Make
Model
Options
Drivetrain
This part doesn’t fit a . Select from parts that fit.