Kit Includes: (1) Passenger Side Outer Tail Light (1) Driver Side Outer Tail Light
Quantity: 2 Piece
Specification
Side Location
Driver & Passenger Side
Location
Outer
Product Features
Direct Fit - No vehicle or wiring modification necessary
DOT, SAE, and FMVSS Compliant - Meets on-road use regulations
Matching set for a restored look
Complete Repair in One Purchase - Stop searching for parts individually and complete your repair with a customized kit or set from DIY Solutions.
High-Quality Parts from Trusted Brands - DIY Solutions' kits and sets are selected from the best automotive brands and include hard-to-find and even obsolete parts you may need for your vehicle.
Guaranteed Fit - DIY Solutions ensures its selected parts are quality-tested to guarantee fit and function.
Assemblies may include halogen or incandescent test bulbs that should be replaced before installation.
Item Condition:New
Attention California Customers:
WARNING: This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii and Alaska.
Shipping is not available to a P.O. Box, APO/FPO/DPO addresses, US Territories, or Canada for this item.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii.
Final shipping costs are available at checkout.
How to Replace Tail Light 1997-2003 Chevy Malibu
Created on:
Tools used
No Tools Needed
1. Removing the Taillight
Twist off the top clip in the trunk.
Pull down the insulation.
Twist off the three wing nuts.
Pull the taillight out and off.
2. Replacing a Bulb
Disconnect the harness.
Pull back the tabs and pop out the connector plate.
To replace a bulb pull the bulbs out and push a new one in.
Push the connector plate into place.
3. Replacing the Taillight
Connect the harness.
Line up the taillight and press it into place.
Replace the three wing nuts.
Replace the insulation.
Twist the top clip back into place.
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
In this video, we're going to show you tail light replacement on this 2001 Chevy Impala, same as a '97 to '03, and no tools are necessary.
To replace the tail light, pretty easy, you're going to see a loosen type of. Then, you pull this back, and then there's three wing nuts, and you can also use, I believe, a 10-mm wrench. Remove those three.
Tail light pulls back. If you're looking to replace a bulb, you want to disconnect your connection here, which basically from the bottom, there's a little tab and pull. Here's a little tab, and you pull that connector. There's your tail light off. Your bulbs are back in here. Pull up on these little tabs. You can see there's water in this one. Pull that plate off. Then, the bulbs just pull right out. Then once you have this plate off, the bulbs pull out and push back in. The plate just pops right back on like that.
New tail light from 1A Auto. Everything is going to go in just the same. Pops right in. Just kind of make sure you use the plug in the right spot. Pop that on. Then, make sure all your studs go in and then use your nuts on the back side. Then, you just put this back in place and you're all set.
We hope this helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll free 888-844-3393. We're the company that's here for you on the Internet and in person.
Product Reviews
Loading reviews
5.00/ 5.07
7 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
7
0
0
0
0
More there than expected.
Daniel
December 15, 2016
Had tail light out that was more than a bad bulb. Needed to replace circuit board so figured I would get these to since the weather seal on the originals was gone. Pleasantly surprised when these cam with the circuit board. Sent the other parts back to 1A for full refund.
Quick delivery
M
September 9, 2018
Fit vehicle as expected. YouTube video made installation easy.
Chevy Malibu Tail Lights
Frank
December 16, 2018
After ordering headlights for my Chevy Malibu, I decided to orderI new tail lights also. Both sets of lights were easy to install and fit perfect.
Hugh
December 3, 2021
iTEMS HAVE BEEN INSTALLED FOR SOMETIME NOW AND THEY WORKED OUT GREAT. iNSTALLATION WAS VERY EASY.
Abraham
October 14, 2022
Good thanks.
Perfect fit at a great price.
Carl
May 20, 2023
Exact replacement for OEM equipment.
They are an excellent product!
Judith
October 24, 2023
Easy to install, and they look great!! I would buy them again if I ever need to.
Customer Q&A
No questions have been asked about this item.
Customer service
877-844-3393
Monday - Friday 8:00am - 9:30pm ET Saturday - Sunday 8:00am - 4:30pm ET
Chevrolet is a registered trademark of General Motors Company. 1A Auto is not affiliated with or sponsored by Chevrolet or General Motors Company.See all trademarks.
Enter Vehicle Year Make Model
Specify your vehicle's year, make and model to guarantee fit.
Year
Make
Model
Options
Drivetrain
This part doesn’t fit a . Select from parts that fit.