Replaces
Part Details
Product Features
Complete Repair in One Purchase - Stop searching for parts individually and complete your repair with a customized kit or set from DIY Solutions.
High-Quality Parts from Trusted Brands - DIY Solutions' kits and sets are selected from the best automotive brands and include hard-to-find and even obsolete parts you may need for your vehicle.
Guaranteed Fit - DIY Solutions ensures its selected parts are quality-tested to guarantee fit and function.
Assemblies may include halogen or incandescent test bulbs that should be replaced before installation.
Item Condition:
New
Attention California Customers:
WARNING: This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
Created on:
Tools used
Brought to you by www.1AAuto.com, your source for quality replacement parts, and the best service on the internet.
Hi, I'm Mike from 1A Auto. I hope this how to video helps you out and next time you need parts for your vehicle think of 1AAuto.com.
In this video we show you how to service the taillight on this 2005 Chevy Cobalt. Pretty much the same for any 2005 to 2010 Cobalt. The only tool you will need is a 7mm socket with a ratchet and extension or a 7mm wrench will work as well.
To service your taillight, you will want to remove these two 7mm screws. I will do that a little later. Inside, you want to go right back up in here and remove this thumb screw here. Then pull this back and there is another thumb screw right up here. Here I use a 7mm socket with a ratchet and extension to remove those two screws. Take those out and pull the light right out. There's a connection right here. Press down on the tab and pull that from there. Press down on the tab here and disconnect the light.
You don't have to disconnect it, but to just service the bulbs turn counterclockwise and then they just pull out of their sockets. Replace them with new ones, if that is what you need to do. Same thing here and the same thing here. To reinstall, it's just a reversal of the procedure. Make sure you plug in your connection. I'll look back at the studs and make sure they go right into the body.
I'm going to fast forward here again as we just tighten up those two screws again 7mm socket with a ratchet and extension or just a 7mm wrench will work as well. Now you want to take this plain wing nut and put it up on the top one here. Tighten it up into place. Put this trim back in place. Now take this and put it right on here. Okay, the light's all set.
We hope this helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts, and the best service on the internet. Please feel free to call us toll free 888-844-3393. We are the company that's here for you on the internet and in person.
