Kit Includes: (1) Passenger Side Performance Headlight (1) Driver Side Performance Headlight
Housing Color: Diamond Style
Quantity: 2 Piece
Grade Type: Performance
Product Line: Performance
Specification
Side Location
Driver & Passenger Side
Assemblies may include halogen or incandescent test bulbs that should be replaced before installation.
Features and Benefits
Direct Fit - No vehicle or wiring modification necessary
DOT, SAE, and FMVSS Compliant - Meets on-road use regulations
Matching set for a restored look
Housing ColorDiamond Style
Item Condition:New
Attention California Customers:
WARNING: This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii and Alaska.
Shipping is not available to a P.O. Box, APO/FPO/DPO addresses, US Territories, or Canada for this item.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii.
Final shipping costs are available at checkout.
How To Replace Headlights 1999-2006 GMC Yukon
How to Replace Headlights 2000-06 Chevy Suburban 1500
Created on:
Tools used
No Tools Needed
1. Removing the Pins
Open your hood, and locate the pins that hold the headlight in. Twist these pins, and remove to release the headlight from the mounting bracket.
2. Disconnecting the Headlight
Pull the headlight forward, and locate the low beam and high beam connectors. Disconnect them by putting your thumb into securing clasp and pulling.
The headlight is now free from the vehicle.
3. Connecting the New Headlight:
Bring your new headlight over and reconnect the low beam connector. Do the same for the high beam connectors.
4. Replacing the new Headlight
Slide the headlight back into the vehicle, making sure the low beam connector is pushed back into the hole so it doesn't get caught between the headlight and the mounting bracket.
Press everything down and lock them back into place with the pins.
5. Test the New Headlight
Make sure to test both low and high beams.
This video will detail headlight replacement on 2000 to 2006 GM SUVs pickups.
This replacement is similar for our 2000 to 2006 Yukons and Yukon Excels, 2000 to 2006 Tahoes and Suburbans, 1999 1500-series pickups to Sierra and Silverado, and 2007 classic series.
The headlight procedure is the same for all trucks that look similar to our example truck a 2002 Yukon Denali. It has the projector beam headlights. The procedure to replace the headlights is the same, whether or not you have the projector beam headlights or regular headlights. No tools are required for this and it only takes about three to five minutes.
The process to remove the headlight is very easy. Open your hood, locate the pins that hold them in, twist them, hold them up, and remove them to release the headlight from the mounting bracket.
Then, pull the headlight forward. Locate the low beam and the high beam connectors. Disconnect the connectors by putting your thumb into the connector and pulling.
Now the headlight is free from the vehicle. Get your new headlights and reconnect the low beam connector. Now reconnect the high beam connector, and then slide it back in the vehicle, making sure that on the pigtail of that low beam connector is pushed back into the hole so it doesn't get caught between the headlight and the mounting bracket.
Now press everything down and lock them back into place and you're done. Do a test and you're set.
Again, this goes for most 2000 to 2006 GM Trucks and SUVs.
Tools used
No Tools Needed
1. Removing the Headlight
Remove the two rods from the headlight bracket
Pull the headlight out by maneuvering it from the grille
Disconnect the two headlight wiring harnesses
2. Servicing the Bulbs
Twist the bulb socket counterclockwise out of the light
Pull the bulb off of the socket
Push on the new bulb
Twist the bulb clockwise into the light
3. Installing the New Headlight
Reconnect the two wiring harnesses to the headlight
Push in the outside end, pull back on the grille, and push in the inside end of the headlight
Slide the two rods into the headlight bracket
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Don from 1A Auto. I hope this how-to video helps you out, and the next time you need a part for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to service the bulbs, as well as replace the entire headlight assembly on this 2002 Chevy Suburban. It's the same part and similar process on these Suburbans from 2000 to 20006. There are no tools required for this procedure.
Just pull out on these rods and then lift them up and out, and now your headlight will pull free. You do have to maneuver it by pulling out on your grill a little bit. Just lift up on these tabs and pull these harnesses free. Now to service the bulb: you just twist the socket counterclockwise and pull it out. Then twist your new one in clockwise to lock it. Both bulbs are the same procedure.
On the left is the old headlight assembly; on the right is the new one from 1A Auto. You can see they're identical, and they're going to fit exactly the same. We also have a couple performance options at 1AAuto.com that will also fit just as well.
Take your new headlight and reconnect those two harnesses. Then push the outside end in first, pull back on your grill, and push in the inside end. Once you have it back in place, you want to just slide that rod back down in. Once the headlights lined up properly, it'll slide right down, and just push it in to lock it. Do the same thing with this one and then you're all set.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
332-1182PXAS
In Stock
Product Reviews
Loading reviews
4.83/ 5.06
6 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
5
1
0
0
0
Headlights
Glenn
October 22, 2018
Product was a perfect fit for 2001 Chevrolet Silverado 3500, as advertised. These were purchased to replace the original, scratched up and weathered, poorly reflective originals. The loss of brightness, even with new bulbs, made for reduced lighting on the road. The diamond reflectivity of the headlights, coupled with new high output lamps, has made a noticeable improvement in nighttime driving.
Very impressed
V
November 6, 2020
Very impressed with this set. They look really sharp on my 2003 Chevy Tahoe Z71. I have not washed the car yet, so I can not review how they will act moisture was with pressurized water. It has rained a few times here and there is no moisture in the unit.
I purchased LED plug and play lights and they look phenomenal, coupled with this product. I give it five stars right now. It also fit perfectly, no adjustments needed.
Jose
March 15, 2022
Great looking headlights
Stan
September 1, 2022
Better quality than OEM w/ a much more affordable price.
They are great just need the tool to adjust them
Chris
March 24, 2023
They look great and they are awesome against the rain. The issue I had was that to adjust the headlights, the adjusting "area" didnt use factory torx tool. I couldn't find a socket small enough to adjust the headlights. I used a set of pliers that strips the small hex area to adjust them. I wished they gave that option to purchase the tool or given a head up.
I highly recommend these headlamps for 2002 Tahoe.
Ronald
January 13, 2024
Perfect fit. Excellent price. 2002 Tahoe.
Customer Q&A
Does the kight bulbs turn clockwise to lock in or do they lock in with screws?October 13, 2020
Carl M
10
The bulb locks in by turning clockwise
October 13, 2020
W A
10
Hello,
He is correct you do turn them clockwise.
October 14, 2020
Corey M
Are these smoked or crystal clear?April 29, 2022
Michael S
10
Clear
April 29, 2022
Robert C
10
These will be clear lenses.
April 29, 2022
Emma F
10
Crystal clear.
April 29, 2022
Jonathan H
10
These are the crystal clear ones.
April 29, 2022
Justin J
10
The one's I got seem to be crystal clear.
April 29, 2022
Larry M
Customer service
877-844-3393
Monday - Friday 8:00am - 9:30pm ET Saturday - Sunday 8:00am - 4:30pm ET
Chevrolet is a registered trademark of General Motors Company. 1A Auto is not affiliated with or sponsored by Chevrolet or General Motors Company.See all trademarks.
Enter Vehicle Year Make Model
Specify your vehicle's year, make and model to guarantee fit.
Year
Make
Model
Options
Drivetrain
This part doesn’t fit a . Select from parts that fit.