WARNING: This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
How To Replace Tailgate Handle Bezel 2007-13 Chevy Silverado
How To Replace Tailgate Handle Bezel 2007-13 Chevy Silverado
Created on: 2013-10-07
Tools used
13mm Socket
Flat Blade Screwdriver
Phillips Head Screwdriver
Ratchet
1. Removing the Tailgate Handle Bezel
Remove the ten Phillips head screws from the tailgate panel
Remove the two 13mm bolts from the tailgate panel
Pull off the tailgate panel
Remove the 13mm bolt from the tailgate
Raise the tailgate
Pry off the tailgate handle bezel with a flat blade screwdriver
2. Installing the Tailgate Handle Bezel
Push the tailgate handle bezel into place
Lower the tailgate
Insert the 13mm bolt into the tailgate
Put the tailgate panel into place
Insert the 10 Phillips screws into the tailgate panel
Insert the two 13mm bolts into the tailgate panel
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Mike from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to replace the tailgate handle bezel on this 2011 Chevy Silverado 1500. Sometimes these bezels just crack or break. It's a pretty simple replacement. The only tools that you're going to need for this is a Phillips screwdriver and a 13 millimeter socket and ratchet, as well as a flat-blade screwdriver.
Using a Phillips screwdriver you want to remove these ten Phillips head bolts that line this tailgate panel, and also you want to remove these two 13 millimeter bolts here. We'll just fast-forward as he removes all of these. Now, with all of those removed, you can remove that tailgate panel, and then you just want to remove this one 13 millimeter bolt right here.
Once that's removed, you want to put your tailgate up. Now you want to stick a flat-blade screwdriver behind the bezel and just pry it out. It should come right off.
To install your new one, you just want to put the handle up inside the bezel. You want to run the lock through the square on the handle, and then just push that bezel into place. On the other side of the tailgate, you want to replace that 13-millimeter bolt. Now you want to take your tailgate panel and put that back into place. We'll fast-forward as he replaces the 10 Phillips head bolts and the two 13 millimeter bolts.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
BDA36081
In Stock
Product Reviews
Loading reviews
4.00/ 5.01
1review
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
0
1
0
0
0
Works
Jon
November 9, 2021
Everything matched up just fine. Tolerances are close enough to work.
Customer Q&A
No questions have been asked about this item.
Customer service
877-844-3393
Monday - Friday 8:00am - 9:30pm ET Saturday - Sunday 8:00am - 4:30pm ET
Chevrolet is a registered trademark of General Motors Company. 1A Auto is not affiliated with or sponsored by Chevrolet or General Motors Company.See all trademarks.
Enter Vehicle Year Make Model
Specify your vehicle's year, make and model to guarantee fit.
Year
Make
Model
Options
Drivetrain
This part doesn’t fit a . Select from parts that fit.