/1987 Chevrolet V30 3 Piece Pedal Pad Set General Motors OEM GMIMK00013
GMIMK00013-Chevrolet GMC 3 Piece Pedal Pad Set General Motors OEM GMIMK00013
GMIMK00013General Motors OEMtrue
Replaces
1987 Chevrolet V30 3 Piece Pedal Pad Set General Motors OEM GMIMK00013
recommended installation videos
sponsored by
Out of Stock
$73.95
Notify When Available
Description
Vehicle Fit
Warranty & Shipping
How-To & Tools
Part Details
Kit Includes: (2) Clutch or Brake Pedal Pads (1) Accelerator Pedal Pad
Quantity: 3 Piece
Genuine original equipment part (OEM) that was factory installed on your vehicle by the manufacturer.
Item Condition:New
1 Year Warranty
This item is backed by our 1-year warranty. In the event this item should fail during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
How to Replace Gas Pedal Pad 1988-99 GMC Sierra K1500
Created on:
Tools used
Flat Blade Screwdriver
1. Removing the Brake Pedal Pad
Remove the lock ring from the end of the pedal with a flat blade screwdriver
Unhook the spring from the arm
Remove the pedal
2. Installing the Brake Pedal Pad
Line up the spring into its slot and press the pedal into place
Snap the hook of the spring onto the pedal shaft
Press the lock ring on
Hi, I'm Mike from 1AAuto. We've been selling auto parts for over 30 years! We're dedicated to delivering quality auto parts, expert customer service, and fast and free shipping, all backed by our 100% satisfaction guarantee. So visit us at 1AAuto.com, your trusted source for quality auto parts.
Using the small flat blade screwdriver, remove the lock ring from the end of the accelerator pedal. Unhook the spring from the pedal arm and hand it down. Then, slide all of it off of the pedal.
Line up the spring into its slot in the pedal and slide it back onto the shaft. Snap the hook of the spring back onto the pedal shaft. Make sure that it actually works. Slide the lock ring back on. You just push it down as tight has you can with your fingers. You're good to go.
Thanks for watching. Visit us at 1AAuto.com for quality auto parts, fast and free shipping, and the best customer service in the industry.
Product Reviews
Loading reviews
There are no reviews for this item.
Customer Q&A
No questions have been asked about this item.
Customer service
877-844-3393
Monday - Friday 8:00am - 9:30pm ET Saturday - Sunday 8:00am - 4:30pm ET
Chevrolet is a registered trademark of General Motors Company. 1A Auto is not affiliated with or sponsored by Chevrolet or General Motors Company.See all trademarks.
Enter Vehicle Year Make Model
Specify your vehicle's year, make and model to guarantee fit.
Year
Make
Model
Options
Drivetrain
This part doesn’t fit a . Select from parts that fit.