Replaces
Part Details
Item Condition:
New
Attention California Customers:
WARNING: This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
Created on:
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Mike from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to replace the rear interior door handle on this 2003 GMC Envoy XL. It's the same part and similar process on the regular Envoys from 2002 to 2009. The items you'll need for this are a new interior door handle from 1AAuto.com, flat blade screwdriver, a 7mm and 10 mm socket and ratchet, and the putty knife.
Start off by prying up this little cover with a flat blade screw driver. Then, remove those two 7mm bolts. Stick a putty knife behind the door panel and slide it down until you find the first clip and pry out and reach in behind the door panel and just pull out around each clip. Once you remove each of those clips, you can pull the door handle back. Then just push this switch from underneath. It comes up and out. Then push the tab on the harness and disconnect it. You could technically do this before removing the door panel, but you're more likely to scratch up your door panel if you do that.
Remove this 10mm bolt. Slide the door handle forward and then pull it out, and then you want to just push this clip off this rod. Then, lift the rod up and out of the hole, and then, repeat that process with this lower one, and your door handle will pull free.
Take your new door handle. Starting with the lower rod, push it into that hole and then push the clip back onto it. Then, take the top one and do the same thing. Then push the door handle back into place and slide it back, and then, just replace that 10 mm bolt and tighten it up.
To replace your door panel take the small panel and push it back onto these studs. Then, push the harness for that switch back up through the hole in the door panel. Line up the clips on the door panel, and once you have them all lined up, just hit them into place. Reconnect the switch and push it down into place, and then replace those two 7mm bolts and tighten them back up. Now just replace the small cover, and you're all set.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Mike from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to replace an interior door handle on this 2003 GMC Envoy XL. It's the same part and similar process on the regular Envoys made after 2002. We show you on the driver side, but the passenger side is the same procedure. The items you'll need include a new interior door handle from 1AAuto.com, flat blade screwdriver, 10mm socket and ratchet, and a putty knife.
Pry up the back of your switch panel with the flat blade screwdriver. Then pry up the front. Pull the switch panel up and out, push the tab on these two harnesses on this end, and disconnect them. Use a flat blade screwdriver and pry up the tab on the remaining harnesses. Next, remove this 10mm bolt in here and this 10mm bolt right there. We'll fast-forward as Mike does this.
Using a putty knife, push this back in behind the door panel and slide it down until you find a clip. Then just pry out. You can reach your fingers back there and just pry out around the edge. Pry out on this small part of the panel up here. Lift your door panel up and out of the window sill and it's free.
Remove this ring. Then remove this 10mm bolt. We'll fast-forward as Mike does that. Slide the door handle forward, then pull it back. Push this clip off this top rod. Lift the rod up and out. Do the same thing for this one down here.
Up top is the old interior door handle; below it is the new one from 1A Auto. You can see they're identical and they'll fit exactly the same. Push the rod back down into the handle and re-clip it. Do the same thing with the upper rod. If it's hard to reach, you can use a flat blade screwdriver and just pry it back on. Push the door handle back into place and slide it back. We'll fast-forward as Mike replaces that 10mm bolt. Put this ring back onto the door handle.
To replace your door panel, push the harnesses back through this hole. Lift the door panel up and into the window sill. Once you have that lined up, push it down into place. Make sure the clips are lined up, and then just hit them back in along the sides of the door panel.
For these bolts, what you want to do is be able to hold them into the socket. A little bit of glue or any kind of a piece of cloth. I just have a little electrical tape, put on the bolt head, and stick it in the socket. That way your screw will stay in there. You can just put it right in and start it. We'll fast-forward as Mike replaces and tightens up those two bolts. Reconnect the harnesses to your switch pack. Line up your switch panel and push it back down into place.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
