Replaces
Frequently bought together
Item Condition:
New
1 Year Warranty
This item is backed by our 1-year warranty. In the event this item should fail during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
Created on:
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the internet.
Hi, I'm Mike Green. I'm one of the owners of 1A Auto. I want to help you save time and money repairing and maintaining your vehicle. I'm going to use my 20+ years' experience restoring and repairing cars and trucks like this to show you the correct way to install parts from 1AAuto.com. The right parts installed correctly, that's going to save you time and money. Thank you and enjoy the video.
In this video, we're going to show you how to replace the cabin air filter on this 2002 Sierra, same procedure for any '99 to '02 Silverado or Sierra, as well as 2000 to 2002 Suburban Tahoe and Yukon. The only tools you'll need are a 7mm and a 7/32" inch sockets with a ratchet and small extension.
On the passenger's side there are four 7mm bolts to remove - one there and one in there. There's one up in that hole right there; I can't really video it, and then over here closer to the gas pedal there is one right there. Once you remove those bolts, just reach in and pull it down and out of the way. Once you have that cover off, up and underneath here, this is where your cabin filter's located. You need a 7/32" socket, and there is a bolt hidden by this wiring harness here. There's a bolt right here you need to remove, and then this comes down. It also locks on the top, but once you pull it down like that This is your filter right here, so just shake and pull it down. Then there's actually another one here, and we'll pull towards the back and down. As you can see, all the dirt coming out, these have probably never been changed in this vehicle. You can probably take your shop vac or house vac and just stick it up in there and get some of this stuff out.
Here you can see my original ones and my new ones. I'm imagining that I'm going to get quite a bit more air flow. Now I'm ready to put my new filters back up in there. You'll want to pay attention. This has arrows on it: air flow that way. Your fan is over here, closer to the passenger side wall, so you want the airflow arrows pointing towards the driver's side. Let's put one up in, and then push it towards the back. Same thing, make sure the airflow arrows are correct here and then push that one up and in. And then this installs, you put the hook up in first and then push it up. I did use a little bit or warm, soapy water to wash off this door. So I'll get that in and tighten it up.
The final part is to put your cover back in place. You want to push it up in there. You push it against the firewall first. I'm sorry about shaking around a little bit here; I'm just trying to film with one hand and push it up in there with the other. Push the front of it up and in first, and then make sure you have everything lined up. As you can see here, these are the passenger side outlet holes. Make sure those are all lined up, and then start your end bolt here. I'd recommend starting the one over near the driver's side. Once you have those lined up, then the other two middle ones go in pretty easily.
We hope this helps you out. Brought to you by www.1aauto.com, your source for quality replacement parts and the best service on the internet. Please feel free to call us toll free: 888-844-3393. We're the company that's here for you on the internet and in person.
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Don from 1A Auto. I hope this how-to video helps you out, and the next time you need a part for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to replace a cabin air filter on this 2002 Chevy Suburban. The items you'll need for this includes a new cabin air filter from 1AAuto.com, a 7mm socket, a ratchet, a 7/32 inch socket, and a flat blade screwdriver.
You want to start off by removing this panel below your club box, and its held in with these three 7mm bolts right there. We'll just fast-forward as Don removes those. And you really only have to remove the two on the outside. The one towards the center of the vehicle you can just loosen.
Now, once that panel's pulled down, you can see this bolt right here for your cabin air filters. And this is a 7/32 inch. You can just go ahead and remove that. Push in the tab on this bracket and pull it down. Now you can pull your air filters down and out. Just pull this one forward, down, and out.
On the left are the old cabin air filters; on the right are the new ones from 1A Auto. You can see they're identical, and they're going to fit exactly the same. Feed your new cabin air filters back up into place. We didn't show here, but we vacuumed out that are a little bit before we put the filters back up in.
Now push this tab back up into place, re-clip the other side, and replace that 7/32 inch bolt. After you put the filters back up, then you can vacuum off the panel before you put it back up. Now push this panel back up into place. Then replace those three 7mm bolts. Just tighten them up, and we'll fast-forward as Don does this. Once you've done that, you're all set.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
