Replaces
Part Details
TRQ side mirrors and mirror components are designed to match the function, fixture, and performance of the original version for easy installation. TRQ mirrors are DOT certified, comply with all federal safety standards, and are independently lab tested to ensure our products comply with all government regulations. All products are fit and road-tested in our Massachusetts R&D facility to ensure we deliver on our promise of Trusted Reliable Quality.
Product Features
Exact fit - To obtain proper fit and function confirm your vehicle has the exact mirror options listed.
Item Condition:
New
Attention California Customers:
WARNING: This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
Created on:
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Mike from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to replace the mirror glass on this 2002 Chevy Suburban. We'll show you on the passenger's side but the driver's side is a similar procedure. The items you'll need for this include a new mirror glass from 1AAuto.com and a flat blade screwdriver.
You can see that our mirror glass is cracked, and you want to push in one side so you can see back behind it. You can see these tabs. Using a flat blade screw driver just pry these tabs and then pull forward at the same time. Once you've got a few of them along the top here the glass will pop free. Then you can push off these two wires.
On the left is the old mirror glass; on the right is the new one from 1A Auto. You can see they're identical and they're going to fit exactly the same. Reinstall: if you have heated mirrors then you'll need to reconnect the two wires. Then, when you press the glass back in place, make sure you press around where the ring is that has the clips on it. Don't press on the outside so that, extreme top or the bottom, you could break the glass again.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
